Could Valterra # TC372 be Used with Winnebago Valve 129147-02-000

Question

Question:

2017 Winnebago Vista 29VE Black tank waste valve is Winnebago #129147-02-000 I had a dealer check Winnebago part and the bago number crossed with Valterra T40H. Valve with hub and spigot but no cable. I need to replace just the valve, reusing the existing cable, hub and spigot. I found your part TC372, valve with cable no hub or spigot. At this point if it is the same valve, I dont care that it does have the cable parts. I just need to know if it will fit. The pics are of my existing valve. Thanks. Bought a lot of stuff from you guys and youre the best.

asked by: Steve B

0

Expert Reply:

Yes the Valterra Waste Valve Body part # TC372 is the same as the Winnebago 129147-02-000 that you have which cross references with T40H.

expert reply by: Jameson C

0

Answer 1

Lippert made specific replacement landing gear for your 2011 Keystone Montana 5th Wheel. Replacement Lead Leg for Keystone Montana 5th Wheel Landing Gear #LC178653 and Replacement Follow Leg for Keystone Montana 5th Wheel Landing Gear #LC178652.

view full answer...

Answer 2

The part #T1003DSPB will work for you. It is a replacement for Valterra valves like what the part numbers you mentioned cross reference to.

view full answer...

Answer 3

There may be a bunch of different reason why your Lippert Level-Up system has suddenly stopped working. The most common reasons are due to a dead battery, extending your jacks too far, or a blown fuse. The first thing you should check for is the…

view full answer...

Answer 4

For the Valterra #TC372 the bolt pattern is 3-3/4", and the overall length, minus the protrusion, is 13-7/8". For the Valterra #TC172 the bolt pattern is 2-1/2", and the overall length, minus the protrusion, is…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

You are correct that this refrigerator does not have an ON/OFF switch or function. The best you can do is "Standby" that draws an unknown amount of power. One option is to pull the 12-Volt fuse at the RV power center. A much better option…

view full answer...

Answer 7

The plan you have sounds logical, I contacted the manufacturer to inquire about any additional information they may have that would assist in addressing the issue with your LaSalle Bristol Cable-Actuated RV Waste Valve for Black Water Tank,…

view full answer...

Answer 8

The Valterra Waste Valve Extension Tube #TX9HPB installs by simply threading onto the valve shaft as you can see in the accompanying photo; it replaces your current handle so that 9 inch measurement would be from the top of the valve shaft. There are…

view full answer...

Answer 9

Unfortunately LaSalle Bristol completely covers the connection point in plastic so the only way to gain access to gate inside the LaSalle Bristol Cable-Actuated RV Waste Valve #34466N4BB96GM would be to cut into the plastic for the cord and…

view full answer...

Answer 10

The overall size of the Furrion Over the Range RV Convection Microwave part#FMCM15SS is 29-15/16" wide x 16-3/8" tall x 15" deep and requires a 30" cutout. If this matches the opening and size of the model you have this will be a…

view full answer...

Answer 11

The High Pointe microwave part #HP49ZR would work great as a replacement for what you have now as it's the correct dimensions and also works great. We also have it in black with the part #HP99ZR.

view full answer...

Could Valterra # TC372 be Used with Winnebago Valve 129147-02-000

Product Page this Question was Asked From

Continue Researching