Determining If Curt Trailer Hitch Receiver C13363 Fits 2017 Jeep Compass New Body Style W/ 2 Lift
Question:
Will part #C13363 fit a 2017 Compass New body style if a Rough Country 2inch lift has been installed? My only concern is that the muffler is ped about 1inch with the lift. Will the muffler hit the hitch due to it being ped?
asked by: Robert D
Expert Reply:
Since the Rough Country 2" Lift you installed on your 2017 Jeep Compass New Body Style is a suspension lift there should be no fitment issues with the Curt Trailer Hitch Receiver # C13363 you were looking at.
I am not 100% what you are referring to in regards to the muffler. I looked in the instructions for the Rough Country lift and see no mention of any changes regarding the muffler.
Now if for some reason your muffler was moved, it is possible that the # C13363 would interfere with it, as all of the hitches for your vehicle were designed around the factory muffler placement. If there are fitment issues a local muffler shop will be able to move the muffler as needed.
If you are planning on towing with your Compass you will also need a vehicle wiring harness # C56369, and a ball mount, hitch ball, and hitch pin and clip which can all be found in the etrailer Ball Mount Kit # 989900.
I included videos of the products mentioned for you to take a look at.
Products Referenced in This Question
etrailer Ball Mount Kit for 2" Hitches - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Drop - 4 Inch
- Rise - 1 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 600 lbs TW
- 4000 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Replacement for Dexter Mobile Home Axle Grease Seal 10-41
- Q&A: Torque Rating for Spindle Nut on Trailer Hubs
- Q&A: Recommended Hitch for a 2023 Jeep Compass
- Q&A: Dexter Brake Assembly Recommendations to Replace Part Number 023-357-00
- Q&A: Dual Propane LP Tank Setup 100 Lb for RV or Travel Trailer
- Q&A: Replacement Brake Assemblies for Dexter 023-358-00 Trailer Brakes
- Article: Trailer Hitch Installation Tips
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Q&A: Hub and Drum Assembly with 8 on 6-1/2 Bolt Pattern for Dexter 10,000 Pound Trailer Axle
- Article: How to Choose the Right Trailer Hitch Class
- Article: My Trailer Hitch Doesn't Fit
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Article: Flat Towing Package for 2018 Jeep Wrangler JL and JL Unlimited