What ball mount parts do you recommend for e98862 on Honda Odyssey 2011?
Question:
Hi, Ive got a 2011 Honda Odyssey Ex-L and will buy e98862 receiver mount with the 2inch receiver. What ball mount kit/parts do I need that will provide the correct rise to attach a trailer like a UHaul or a camper. Please include what pin I should purchase too and if there is a locking version. Thanks!
asked by: John
Expert Reply:
When we installed the etrailer brand # e98862 hitch on a 2011 Honda Odyssey, we found that the receiver height was 14 inches, measured from the ground to the inside top of the receiver tube. The correct ball mount will depend on the coupler height of the trailer you're wanting to tow.
Typically, trailer couplers range from 16-19 or so inches high. U-Haul coupler heights are usually right at 18 inches, so if you were to use a ball mount with a 4 inch rise like part # D-28, you'd definitely be in the ballpark. The trailer doesn't need to be perfectly level, but you want to get within an inch or two, and the # D-28 would put you right there. You'll also need a trailer ball. U-Haul used adjustable couplers, so a 2 inch ball like # 63845 would work great. For a hitch pin, use # PC3 or for a locking version, use the stainless steel # e98882.
You'll also need a trailer wiring harness like part # C56378. I've linked to install videos for the # e98862 hitch and the wiring harness I recommended.
Products Referenced in This Question
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Tow Ready
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 14-1/4" Long - 6,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 6 Inch
- Rise - 4 Inch
- Fits 2 Inch Hitch
- 6000 lbs GTW
- Class III
- Long Shank
- CURT
more information >
etrailer Trailer Hitch Receiver Lock for 2" Hitch - Flush - 2-5/8" Span - Stainless Steel
- Trailer Hitch Lock
- Standard Pin Lock
- Keyed Alike
- Stainless Steel
- Fits 2 Inch Hitch
- Flush Pin
- 2-5/8 Inch Span
- etrailer
more information >
Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-1/4" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- 5/8 Inch Diameter
- 4 Inch Span
- Draw-Tite
more information >
Product Page this Question was Asked From
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Visible Cross Tube
- etrailer
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 14-1/4" Long - 6,000 lbs
- Shop: Trailer Hitch
- Q&A: Availability of Replacement Nylon Caps For Rapid Hitch Ball Mount, # AM3405
- Shop: Replacement Nylon Cap for Greaseless HardBall Hitch Ball with 2-5/16" Diameter
- Video: Choosing the Right Trailer Wiring
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Trailer Wiring
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Search Results: hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: Brake Controller
- Search Results: cargo carrier
- Shop: Gooseneck Hitch
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Article: My Trailer Hitch Doesn't Fit
- Shop: etrailer Hitch Pin Alignment Collar for Hitch Accessories - 2" Hitches
- Shop: Fifth Wheel Hitch
- Article: How to Measure for Trailer Hitch Drop
- Shop: Suspension Enhancement
- Article: How to Clean Weld Nuts for the Installation of a Trailer Hitch | etrailer.com
- Shop: Base Plate for Tow Bar
- Q&A: Recommended Hitch for VelociRAX 5 Bike Rack on 2012 Honda Odyssey
- Q&A: How to Determine Correct Curt 4-Way Wiring Harness For 2024 Kia Telluride
- Q&A: What is the Difference Between TPO and PVC Roof Membrane
- Q&A: Difference Between Curt and etrailer Hitches for a 2022 Subaru Crosstrek
- Q&A: How To Install a 7-Way Trailer Connector On a 2016 Honda Odyssey
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Ball Mount Basics: Weight Capacity, Class, and Size