Is there a Trailer Roof Vent that Will Fit a Roof that is 1 Inch Thick

Question:

I have a tow-behind car mate enclosed trailer with a roof vent that needs replaced. The roof is only sheet metal but the vent has a frame around it on the inside which makes the thickness a total of about 1 inch. Your vents are made for a minimum roof thickness of 1 3/4 in. Do you have a vent that would work?

asked by: Brad

Expert Reply:

You can use the Ventline Ventadome Trailer Roof Vent, # V2110SP-24, and then just trim down the garnish to the size you need. The garnish that comes with the vent is actually 2-1/8 inches deep to start with. I have included a link to a video review of this vent for you. We also recommend using the installation kit # 344270KITW when installing a vent.

expert reply by: Michael H