Fit of Curt Class III 13395 Hitch on 2019 Jeep Cherokee Trailhawk
Question:
It says in the description: excluding Trailhawk. Is 13393 the right hitch for a 2019 Trailhawk or not? Thanks for your help!
asked by: Jon N
Expert Reply:
The Curt Class III hitch, part # C13395 fits all models of the 2019-2021 Jeep Cherokee, including the Trailhawk.
What you're referring to is kind of a quirk of our fit guide, it lists this way because some of the other hitches offered for the vehicle exclude the Trailhawk as a fit, which isn't the case with the # C13395.
If you are planning on towing you will also need a wiring harness item # C56406 and a ball mount kit item # C45534.
If you use the provided links, you can see install videos for the hitch and the trailer wiring harness I recommended.
(click to enlarge)
Products Referenced in This Question
- Accessories and Parts
- Trailer Wiring
- Mounting Hardware
- Brackets
- 4 Round
- 5 Round
- 6 Round
- Tow Ready
more information >
1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 2000 lbs GTW
- Class III
- Draw-Tite
more information >
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 4 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Draw-Tite
more information >
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Tow Ready
more information >
Curt Towing Starter Kit for 2" Hitches - 2" Ball - 3/4" Rise, 2" Drop - 7.5K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- 2 Inch Ball
- One Ball
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 0 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Ball Mount Kit
- Pre-Torqued
- CURT
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 675 lbs TW
- 4500 lbs GTW
- 5500 lbs WD GTW
- 2 Inch Hitch
- 750 lbs WD TW
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Measure for Trailer Hitch Drop
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Q&A: Recommended Hitch and 7-Way Connector for a 2020 Jeep Cherokee w/ the Tow Package
- Q&A: Best Concealed Trailer Hitch Receiver For 2018 Jeep Cherokee Latitude
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Trailer Hitch Receiver For 2021 Jeep Cherokee Trailhawk That Protrudes Through Bumper
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Recommended Trailer Hitch for a 2021 Jeep Cherokee
- Q&A: Recommended Replacement Tire for Coleman Lantern LT 17B with 215/75r14 Load Range D
- Q&A: Adapter Recommendation for Mercedes Trailer Wiring to Operate Trailer with LED Lights
- Article: Best Bike Racks for Electric Bikes