Determining If Fastway E2 FA92-00-0600 Will Work With 19' RV Towed By 2005 Toyota Sequoia
Question:
I am looking at #FA92-00-0600 to pull a 19foot RV with 410 lb hitch weight and GWW of 4,803 lb - pulled by a 2005 Toyota Sequoia. Would this work?
asked by: Jim J
Expert Reply:
I would be happy to help.
Weight distribution hitches go off total tongue weight which is the tongue weight of your fully loaded and ready to tow trailer plus the weight of any cargo behind the rear axle of your 2005 Toyota Sequoia. The easiest way to get an accurate tongue weight measurement is with a tongue weight scale like the # e99044 but there are other methods outlined in the included help article.
The Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 6,000 lbs GTW, 600 lbs TW # FA92-00-0600 you were looking at works with total tongue weights between 250-600lbs so as long as your total tongue weight falls in this range this would be a great choice. I really like the Fastway hitches due to them being very high quality for the money, and the built in 2-point sway control does a great job of keeping your trailer going straight down the highway.
If you find your total tongue weight exceeds 600lbs you will need to step up to the # FA92-00-0800 which works with total tongue weights between 400-800lbs.
Neither of these hitches include a hitch ball so you will need ether 2" hitch ball # A-90 or 2-5/16" hitch ball # 19286 to match the coupler on your trailer.
I included videos of the products mentioned for you to take a look at.
Products Referenced in This Question
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 12,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-3/4 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 12000 lbs GTW
- Class IV
- Class V
- Draw-Tite
more information >
2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-5/8 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 10000 lbs GTW
- Class IV
- Class V
- CURT
more information >
etrailer Tongue Weight Scale for Campers and Utility Trailers - 2,000-lb Capacity
- Tongue Weight Scale
- Analog Scale
- 2000 lbs
- etrailer
more information >
Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 8,000 lbs GTW, 800 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 600 lbs
- 700 lbs
- Fastway
more information >
Product Page this Question was Asked From
Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 6,000 lbs GTW, 600 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 400 lbs
- 500 lbs
- Fastway
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: Determining Trailer Tongue Weight
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Q&A: Recommended Weight Distribution System for R-Pod Trailer
- Q&A: Weight Distribution System To Tow 4700 lb Trailer With Toyota Tacoma V6 With Tow Package
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Parts Needed To Install a Trailer Brake Controller On a 2024 Hyundai Santa Cruz With Factory 7-Way
- Q&A: Best Way to Prevent Sagging Suspension When Towing a Trailer
- Q&A: Recommended Towing Mirrors For A 2016 Toyota Highlander
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Weight Distribution System for 3500 GVWR Pop-Up Camper Towed by Toyota Tundra
- Q&A: Weight Distribution Solution for Trailer that Has Angle Iron Frame Design