Recommended Ramps To Load Jeep And UTV Into Enclosed Trailer
Question:
I have an ATC all aluminum enclosed trailer. It has barn doors by design, as that is the way I ordered it. I need ramps for our Jeep Wrangler and Honda Talon. The Jeep is a 21 JLU stock. The Talon is a 21 1000 X4 stock. The trailer doesnt have a place for the lip on the ramps to catch. Will they still work? Looking at the 72inch ramps from Gen-Y. Thanks.
asked by: Steve S
Expert Reply:
All of the ramps we have that can hold your Jeep, such as the Aluminum Car Hauler Ramp Set - 72" x 14-1/2" - 6,000 lbs # 288-07503, have a lip on the front of the ramp to attach to a channel on the trailer. Since your trailer doesn't have this channel, I don't recommend using these ramps because they won't have a good place to be mounted and may slide around. I think your best option here is to go with something similar to the ramps in your trailer which have a flat style front piece.
The closest thing we have is the Arched Loading Ramp Set - Center Fold - Aluminum - 90" x 18" - 3K # 288-07432-2 but this only has a weight capacity of 3,000lbs which will only be enough for your Honda Talon UTV. I attached a demonstration video for the CargoSmart Arched Ramps.
Products Referenced in This Question
Arched Loading Ramp Set - Center Fold - Aluminum - 90" x 18" - 3K
- ATV Ramps
- Ramp Set
- Center-Fold
- 18 Inch Wide
- 3000 lbs
- Arched
- 90 Inch Long
- Aluminum
- Stallion
more information >
Product Page this Question was Asked From
Aluminum Car Hauler Ramp Set - 72" x 14-1/2" - 6,000 lbs - Qty 2
- Car Ramps
- Loading Ramps
- Open Trailer
- 14-1/2 Inch Wide
- 16 Inch Lift
- 72 Inch Long
- Car Hauler Ramps
- 6000 lbs
- Stallion
more information >
Continue Researching
- Shop: Aluminum Car Hauler Ramp Set - 72" x 14-1/2" - 6,000 lbs - Qty 2
- Shop: Arched Loading Ramp Set - Center Fold - Aluminum - 90" x 18" - 3K
- Q&A: How To Get A 90" x 54" Loading Ramp For Loading Snowmobile
- Q&A: Does Stallion Aluminum Car Hauler Ramp Set Have Lip to Drop Into Gap At End of Trailer
- Shop: Gen-Y Hitch Aluminum Loading Ramp Set - 6' Long x 14" Wide - 6,000 lbs
- Q&A: Will the Stallion Ramps 288-07503 Work With a 3600 Pound Vehicle That Has 10 Inch Rear Tires
- Search Results: aluminum ramps
- Q&A: What Ramps Are Good For Loading A Car Onto A Flat Bed Truck
- Q&A: Could Aluminum Car Hauler Ramp Set Carry 2015 Chevy SS
- Shop: Spring Latch for Trailer Tailgate - 2 Hole - 2" x 1-1/8" - Stainless Steel - Right Hand
- Search Results: ramp brackets
- Q&A: Weight Capacity of Stallion Aluminum Car Hauler Ramp Set # 288-07503
- Q&A: Trailer Loading Ramps Needed for a Trailer Floor that is 22 High
- Shop: Loading Ramp Set - Aluminum - 65" Long x 20-1/2" Wide - 3,000 lbs - Qty 2
- Shop: Aluminum Car Hauler Ramp Set - 48" x 14-1/2" - 6,000 lbs - Qty 2
- Shop: Trailer Hitch
- Shop: etrailer Tongue Weight Scale for Campers and Utility Trailers - 2,000-lb Capacity
- Video: DeeZee Truck Toolbox - Chest Toolbox - DZ6535P Review
- Search Results: loading ramps
- Video: Arched Loading Ramp Review
- Video: Gen-Y Hitch Aluminum Loading Ramps Review
- Video: Dexter Bronze Bushings Installation
- Video: CargoSmart Anti-Rattle D-Ring Tie-Down Anchor Review 3486509
- Video: Buyers Products Forged D-Ring With 4-Hole Integral Mounting Bracket Review and Installation
- Video: CargoSmart Tie Down Anchors - Trailer Tie-Down Anchors - 3486509 Review
- Article: Rooftop Cargo Carriers
- Shop: Brake Controller
- Shop: Vehicle Seat Covers
- Search Results: aluminum trailer ramps
- Search Results: spare tire mount