Upgrading Fastway Weight Distribution Hitch For a Larger Travel Trailer
Question:
Hello, We tow with a 2019 Toyota 4Runner and use to have a 2017 Forest River Rpod 178 which we recently sold. We are purchasing a 2021.5 Rockwood Geopro 20BHS. I removed the weight distribution hitch from our Rpod and I am going to install it on our new Geopro. My question is, will our current weight distribution hitch work with our new Geopro as far as is it the correct weighted one. The one we have is part number 94-00-0600 Fast Way e2 Weight-Distribution Hitch - Round Bar - 6K which we purchased from you guys years ago. Worked great on the Rpod but i do know the Geopro is a little heavier overall and has more tongue weight. Should i upgrade or is the one is have perfect and safe to use. Any information would be greatly appreciated. Thank you
asked by: Jeremy Q
Helpful Expert Reply:
The 2021.5 Rockwood Geopro 20BHS has an unloaded tongue weight of 455lbs. The maximum cargo capacity of the trailer is an additional 842lbs and GVWR of 4,355lbs. I feel that if you are able to limit the weight and distribute the cargo weight evenly front to back that you will be able to stay below the 600lb maximum of the Fastway e2 Weight Distribution # FA94-00-0600.
I recommend to change out the Round Spring Bar # FA94-02-0899. Two of these are designed for trailers with 400-800lbs of tongue weight. This will ensure that you don't overload the bars that you currently have. And best of all you do not have to replace the entire hitch to upgrade to these bars.
I do believe the Rockwood will require a 2-5/16" Hitch Ball # EQ91-00-6100 where the Rpod only used a 2" ball. Be sure to check with your dealer for what is needed.
Products Referenced in This Question
2-5/16" Hitch Ball for Equal-i-zer Weight Distribution Systems - 10,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-3/8 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 10000 lbs GTW
- Class IV
- Class V
- Equal-i-zer
more information >
Replacement Round Spring Bar for Fastway e2 Weight Distribution Systems - 800 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Spring Bars
- 800 lbs TW
- Round Bar
- e2
- Fastway
more information >
Product Page this Question was Asked From
Fastway e2 Weight Distribution w/ 2-Point Sway Control - Round - 6,000 lbs GTW, 600 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 500 lbs
- Fastway
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Determining Trailer Tongue Weight
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Can A Weight Distribution Hitch Be Used Together With An Electronic Sway Control System
- Q&A: Is Etrailer Ball Mount As Good Of Quality As Draw-Tite Or Curt?
- Q&A: Best Weight Distribution System for a R-Pod 171 Trailer
- Q&A: Weight Distribution Hitch For A 2016 R-pod 179 With 300 Lb Tongue Weight And 3800 Lb Trailer Weight
- Q&A: Comparing Fastway e2 Round and Trunnion and Equal-i-zer Trunnion Weight Distribution Systems
- Q&A: Recommended Weight Distribution System for Rpod 179 Travel Trailer
- Q&A: How To Help Fight Trailer Sway On a Forest River Wolf Pup 17JG