Is Item # HLY64FR Compatible With A Fat Tire Bike That Has A 60 Wheelbase

Question

Question:

i have two Sikk fat tire bikes. 26 inch. From where the tire touches the ground it is 60 inches between the two.. Will this bike rack work for my application

asked by: Robert Z

0

Expert Reply:

Item # HLY64FR will accept a maximum wheel base of 60 inches. If you measured 60" where the tire touches the ground, that should be pretty close to center on the wheel and would work fine with your 2 Sikk fat tire bikes. Keep in mind the tire width can not exceed 5"

expert reply by: Shane H

0

Answer 1

The Hollywood Racks RV Rider #HLY64FR has a frame clamp design that was intended for use with step through style bike frame like what your Aventon Adventure bikes have so this rack would work perfect for you. I attached a picture that shows this…

view full answer...

Answer 2

The Hollywood Racks RV Rider Bike Rack for 2 Electric Bikes #HLY64FR does not have a minimum diameter wheel, but I was able to find out that it will work with your 20 inch diameter wheels and tires that are up to 5 inches wide so it will be…

view full answer...

Answer 3

Yes, the Hollywood Racks RV Rider Bike Rack for 2 Electric Bikes, #HLY64FR, has an anti-rattle hitch pin and hitch tightener to reduce movement of rack in hitch receiver.

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

view full answer...

Answer 6

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...

Answer 7

I have a solution for you. Here at Etrailer, we strongly discourage using wheel-mounted bike racks like the Kuat NV 2.0 #NV22B for bikes with fenders. Mounting wheels with fenders can cause the fenders to crack or become damaged, especially with the…

view full answer...

Answer 8

The RockyMounts MonoRail bike rack you'd looked at, part #RKY10004 is a great bike rack, but it wouldn't work well with bikes that have fenders like your Aventon Aventure Fat tire ebikes. The front fender would prevent the bike retaining hook…

view full answer...

Answer 9

At the rear of a trailer or RV the ride quality is very rough when compared to the ride quality at the rear of a passenger vehicle. Reason being the suspension isn't as sophisticated and there is a longer distance between the rear axle and the…

view full answer...

Answer 10

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 11

For an e-bike rack for your Letric XP step thru bikes at the rear of an RV the Swagman E-Spec part #S94FR would be a great choice as it's rated for the rougher ride quality at the rear of RVs, has the higher weight capacity needed at 60 lbs per…

view full answer...

Answer 12

For a 70 lb E-bike with fat tires we really only have one option that will work well. That's the Hollywood Racks #HLY84FR that has a weight capacity of 80 lbs per bike and can accommodate tire widths of up to 5 inches. It can also carry up to two…

view full answer...

Is Item # HLY64FR Compatible With A Fat Tire Bike That Has A 60 Wheelbase

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching