Troubleshooting Trailer Deck Screws that are Breaking
Question:
Im curious about the best way to remove these old screws that have been installed for about 8 years or so. Some of these screws are breaking due to the boards over time warping and putting pressure on the screws. The screws break right at the frame and under the trailer, there is only about 3/8 of an inch available to try to use vice grips or other methods to remove. My thought is for some of these I may just replace the screws, but if I want to also replace a couple or all decking what is the best way to remove these screws.
asked by: Michael M
Expert Reply:
If the screws part # TFX250ACQ are breaking that would indicate that they are corroded and seized up in the metal they are attaching to. So what you could do is take some spray lube to them where they attach to the metal and let that soak to see if that helps. Applying heat to the bolts too can help free them up as well.
Product Page this Question was Asked From
2-1/2" Long Torx Trailer Floor and Wall Liner Screw for ACQ Treated Wood
- Accessories and Parts
- Tie Down Anchors
- Hardware
- Torx Screw
- 2-1/2 Inch Long
- Redline
more information >
Continue Researching
- Shop: MaxxFan Deluxe Roof Vent w/ 12V Fan - Manual Lift - 4 Speed - Smoke
- Q&A: Removing Seized Hardware in a Semi Trailer Floor
- Shop: Ventline Vanair Trailer Roof Vent w/ 12V Fan - 6-1/4" Diameter - Smoke
- Shop: CIPA Custom Towing Mirror - Slip On - Driver Side
- Shop: Towing Mirrors
- Shop: 2-1/2" Long Torx Floor Screws, 40/Pkg
- Shop: 2-1/2" Long Torx Trailer Floor and Wall Liner Screw for ACQ Treated Wood
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Erickson Vertical E Track - Zinc Plated Steel - 2,000 lbs - 4' Long - Qty 1
- Search Results: e trac
- Shop: Trailer Hitch
- Q&A: Hub And Drum Replacement for 90865 Rockwell Hub and Drum
- Article: Trailer Wiring Diagrams
- Video: Ventline Ventadome Replacement Vent Installation
- Search Results: 44649
- Search Results: 68149
- Shop: Trailer Wiring
- Video: Ventline Ventadome Trailer Roof Vent Installation
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Trailer Grease Seal to Replace 127194TB
- Video: MaxxFan Deluxe Roof Vent with 12V Fan Review
- Shop: Fifth Wheel Hitch
- Search Results: 25580
- Article: How to Measure for Travel Trailer and Fifth Wheel Steps
- Q&A: Recommended Replacement Grease Seal for 2014 Shorelander Boat Trailer
- Shop: Brake Controller
- Video: Review of Maxxair RV Vents and Fans - Roof Vent - MA00-04751KSX
- Search Results: dust cap