Availability of Smaller Diameter Wheel for Fulton F141133 XLT Swivel Trailer Jack

Question:

Purchased F141133 and need to change the wheel. I need a wheel or foot that will work with this jack that is 6inch or less. I have a ped trailer and the jack swings down so the mast where the wheel is mounted sits too low to use the 8inch wheel. Please advise of options.

asked by: Terry R

Expert Reply:

Unfortunately, the wheel used on Fulton's # F141133 jack is integrated and isn't replaceable. Swivel jacks that pivot upward into a stored position alongside the trailer frame typically won't have a removeable caster wheel, so a replacement caster wheel or a foot isn't available, I'm sorry to say.

The jack you currently have has a bracket height of 17 inches above the pavement when the jack is fully retracted. If you'd go with a jack that has a lower bracket height, it will be the same as going with a smaller diameter wheel, so that's the route I'd recommend taking.

The Fulton # FXP15L has a 12-3/4 inch bracket height when fully retracted and a 12 inch lift, so it'd sit 4-1/2 inches lower that your current jack when fully retracted.

expert reply by: Mike L