Parts Needed To Flat Tow 2011 GMC Acadia
Question:
I would like to talk with someone about all the items i would need to flat tow.
asked by: Joe
Expert Reply:
First you will need a base plate kit made specifically for your vehicle. For your Acadia use the crossbar-style Roadmaster # 523149-1 base plates.
Next you will need a tow bar. I recommend the Roadmaster # RM-522 “Falcon” All Terrain and Non-Binding tow bar rated for 6000 pounds. A non-binding tow bar will let you easily disconnect your tow bar even if your coach and towed vehicle is not on level ground or at a difficult angle.
When your coach and towed vehicle are hitched together on level ground, the tow bar should be within 3” of level, otherwise you will need to add a High-Low Adapter. I have attached an article explaining how to measure for an adapter, and a link to a page showing all of our adapters.
You will also need safety cables to keep the towed vehicle connected to your coach in case of a tow bar failure. I would recommend the Roadmaster # RM-645 which are 64” long and rated for 8000 pounds. I like that the connectors are made so they cannot bounce off the cable hooks. I also prefer the straight cables compared to coiled – it just looks cleaner when they are all tucked away.
Next you will need a flat tow wiring kit. I recommend the Roadmaster # RM-152-98146-7 Universal wiring kit which includes everything you need to connect your RV's tail, brake, and turn signal lights to your towed car. Diodes prevent feedback and wire your car to operate as a combined system. Includes a 7-way to 6-way straight adapter cord. When you do finally get ready to plug your electrical cables in, I would put a little Edelmann # 11755 dielectric grease on those connections. The dielectric grease will keep help keep moisture and corrosion out of your connections.
Your towed vehicle requires that a particular fuse(s) be pulled when in-tow otherwise your towed vehicles battery can be drained. Instead of getting into your vehicles fuse box and pulling the fuse(s) each time, many RVer's use a Fuse Bypass like the Roadmaster # RM76511 so they will have a dash switch to conveniently turn that fuse position on and off.
You will also want a supplemental braking system that improves braking and handling, and extends the life of your coaches braking system. Most states will require them for flat towing over 3000 pounds. If your coach has traditional hydraulic brakes then I recommend the Brake Buddy # HM39524 portable system that has proportional braking and a wireless display for your cab so you can see your braking system status. If your coach has air brakes, you will instead need the Demco # DM26VR supplemental braking system for air brakes.
Products Referenced in This Question
Dielectric Grease for Electrical Connectors, 2 oz.
- Accessories and Parts
- Trailer Wiring
- Wiring
- Dielectric Grease
- LubriMatic
more information >
Roadmaster EZ Crossbar Style Base Plate Kit - Removable Arms
- Base Plates
- Removable Drawbars
- Twist Lock Attachment
- Roadmaster
more information >
Demco Air Force One Flat Tow Brake System for RVs w/ Air Brakes - Wireless Monitoring - Proportional
- Tow Bar Braking Systems
- Brake Systems
- Proportional System
- One Time Set-Up
- Fixed System
- Power Assist Brake Compatible
- Air Brakes
- Demco
more information >
Brake Buddy Select 3 Portable Flat Tow Brake System - Proportional
- Tow Bar Braking Systems
- Brake Systems
- Proportional System
- Recurring Set-Up
- Portable System
- Air Brakes
- Air Over Hydraulic Brakes
- Hydraulic Brakes
- Brake Buddy
more information >
Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord
- Tow Bar Wiring
- Splices into Vehicle Wiring
- Diode Kit
- Universal
- Tail Light Mount
- Roadmaster
more information >
Roadmaster Falcon All-Terrain Tow Bar - Non-Binding - RV Mount - 2" Hitch - 6,000 lbs
- Tow Bar
- Hitch Mount Style
- Telescoping
- Steel
- 6000 lbs
- Fits Roadmaster Base Plates - Crossbar
- Fits Roadmaster Base Plates - Direct Connect
- Stores on RV
- Non-Binding
- Roadmaster
more information >
Roadmaster 64" Single Hook, Straight Safety Cables - 8,000 lbs
- Safety Cables
- Straight Cables
- 64 Inch Long
- 8000 lbs GTW
- Snap Hooks
- Coated Cables
- Roadmaster
more information >
Roadmaster FuseMaster Fuse Bypass - 13" - 20-Amp Mini-Fuse
- Tow Bar Wiring
- Bypasses Vehicle Wiring
- Fuse Bypass
- Custom
- Mini Fuse
- Engine Compartment
- Roadmaster
more information >
Product Page this Question was Asked From
Roadmaster BrakeMaster for RVs w/ Air or Air-Over-Hydraulic Brakes - Proportional
- Tow Bar Braking Systems
- Brake Systems
- Proportional System
- Recurring Set-Up
- Portable System
- Not Power Assist Brake Compatible
- Air Brakes
- Air Over Hydraulic Brakes
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Must-Have Flat Towing Components
- Article: Roadmaster Vehicle Specific Base Plates
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Which Seat Adapter for Roadmaster BrakeMaster for 2024 Jeep Wrangler Willys
- Article: Trailer Wiring Diagrams
- Q&A: How To Know If Your Tiffin Motorhome Has A Towed Air Brake Setup Or BrakeSync
- Article: The Definitive, Step-by-Step Flat Towing Setup Guide
- Q&A: Parts Needed to Flat Tow 2024 Ram 1500 Behind Motorhome With Roadmaster Tow Bar
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Which Bumpers Can I Flat Tow a Jeep Wrangler JLU With Using D-Ring Adapters
- Article: Flat Towing Package for 2015-2018 Ford F-150
- Q&A: What is the Difference Between the Blue Ox Patriot BRK2019 & BRK2022?
- Q&A: How to Run Air Line on Motorhome to Activate Roadmaster BrakeMaster System
- Q&A: Does the Curt Custom Tail Light Wiring Kit for Towed Vehicles C96JR Fit the 2021 Jeep Wrangler 4xe?