Replacement for Fulton Magnum Compatible With Existing Welded-On Bracket
Question:
I have a 2004 Lund Pro V with an original Fulton Magnum trailer jack trailmaster trailer. The jack is old and worn and needs replacement. The bolt pattern is 5 1/2inch east-west and either 3-3 1/2inch north-south, as the bracket is welded on the trailer and the jack is bolted on to the mounting plate. The jack has a center bolt not a snap ring. The jack is a 1200lb jack, which I would like to replace with either a 1200 or 1500lb. I understand that these were made specifically for these boat trailers back in the day, but I was hoping that there is a replacement option. Thank you
asked by: Dave M
Expert Reply:
The Fulton Magnum jack used the # P9012-00 weld-on bracket which would be compatible with the bracket included with the 1200 lb Fulton Jack, part # FXP100W0301 or the 1500 lb model, part # F1411300301.
If your attachment bolt that attaches the jack to the mount on the bolt is worn, you might want to replace that as well. We offer the replacement nut, bolt and bushing as part # F0933325S00.
Products Referenced in This Question
Replacement Hardware Kit for Fulton Swivel Jacks
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Hardware
- Fulton
more information >
Fulton Bolt-Thru Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,500 lbs
- Trailer Jack
- Boat Trailer
- Leveling Jacks
- Tongue Jacks
- Steel
- 1001 - 2000 lbs
- Sidewind Jack
- Swivel Jack
- 10 Inch Lift
- Weld-On
- With Wheel
- Fulton
more information >
Fulton Marine Jack - Weld On - Sidewind - 10" Lift - 1,200 lbs
- Trailer Jack
- Boat Trailer
- Leveling Jacks
- Tongue Jacks
- Steel
- 1001 - 2000 lbs
- Sidewind Jack
- Swivel Jack
- 10 Inch Lift
- Weld-On
- With Wheel
- Fulton
more information >
Jack Mounting Bracket for Fulton Marine Jack - Weld-On
- Accessories and Parts
- Camper Jacks
- Trailer Jack
- Mounting Hardware
- Brackets
- Fulton
more information >
Product Page this Question was Asked From
Fulton Bolt-Thru Swivel Marine Jack w/ Caster - Sidewind - 10" Lift - 1,200 lbs
- Trailer Jack
- Boat Trailer
- Leveling Jacks
- Tongue Jacks
- Steel
- 1001 - 2000 lbs
- Sidewind Jack
- Swivel Jack
- 10 Inch Lift
- Bolt-On
- With Wheel
- Fulton
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Dimensions of Dutton-Lainson Round Swivel Jack DL22335
- Q&A: Difference Between Dexter DX7.5L A-60 & A-60XL Disc Brake Actuator
- Q&A: Replacemnet Surge Brake Actuator For a Tie Down Engineering LP7000
- Q&A: Is the Mounting Pattern for the Fulton Jacks FXP15 and FXP10 the Same
- Q&A: Replacement for Fulton Magnum Series Trailer Jack
- Q&A: Fulton Magnum 1,200 lb Swivel Jack Replacement
- Q&A: Replacement Jack for Ranger Boat Trailer With Dutton Lainson 203960C
- Article: Best Boat Trailer Jacks
- Article: How to Measure for Trailer Hitch Drop
- Article: Trailer Maintenance Schedule
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Trailer Wiring Diagrams
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Choose the Best Winch for You, your Boat, and your Trailer