Reese Sidewinder 5th Wheel Pin Box With Rotating Turret Compatibility With RBW 7019 Pin Box

Question

Question:

My 5th wheel has a RBW 7019 pin box. Will the: Reese Sidewinder 5th Wheel King Pin with Rotating Turret - Lippert 1716 - 20,000 lbs Item # RP77FR be compatible?

asked by: Jeff

0

Expert Reply:

I spoke with Reese to ensure the bolt patterns would line up for you and was told you should be good to go with swapping out your RBW 7019 Pin Box with the Reese Sidewinder 5th Wheel King Pin with Rotating Turret - Lippert 1716 - 20,000lbs Item # RP77FR.

expert reply by: Kevin C

0

Answer 1

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 2

You do not have to use a sliding 5th wheel hitch in a short bed truck. In many cases, truck beds shorter than 8 ft do not have enough clearance between the trailer and truck to execute sharp turns. This is why sliding hitches were invented. Due to…

view full answer...

Answer 3

The only adapter available to add 5th wheel rails using the factory gooseneck hitch on your 2019 Nissan Titan is the Demco #DM6200, but it will work well and allow you to use a standard 5th wheel hitch in your truck bed.

view full answer...

Answer 4

Maximum towing capacity for the Demco 5th Wheel Rail Adapter #DM6200 is 21k and since pin weight is typically 20 percent of total trailer weight that means this has a pin weight capacity of 4,200 lbs.

view full answer...

Answer 5

In order to replace the wing bolt and lock washer for the Demco 5th Wheel Rail Adapter part #DM6200 you'd need both part #DE87ZR and part #DE97ZR. The integrity of the bolt could be compromised therefore I recommend replacement.

view full answer...

Answer 6

Both the #C16560 roller assembly and the #C16505 has the same bolt hole pattern on the uprights, as shown in the provided photo. The side to side center hole to center hole dimension is 3-1/2 inches, and the vertical center to center is 1 inch.

view full answer...

Answer 7

If I understand correctly, you have a Curt E16 5th Wheel Trailer Hitch, #C16115 mounted in the back of a 2016 Nissan Titan XD (6.5 foot bed?). You have a Lippert 1621 Pin Box, #LC1387883, on your 5th wheel but not enough clearance for the cab. I get…

view full answer...

Answer 8

Sounds like you have the Curt 16k E16 Hitch for the OEM prep package of your 2018 Nissan Titan XD with the part #C16515-16026 and are wanting a way to convert the base to a slider for turning clearance. The only way you'll be able to pull that…

view full answer...

Answer 9

I do have a solution for you, but we do not have replacement rollers and bolts for the Curt E16 5th Wheel Sliders. There are two possible replacement slider options for your application. The first option is the Curt E16 Round Tube Slider, part…

view full answer...

Answer 10

Yes, the Reese 5th Wheel Rail Adapter #RP30154 that you referenced will work with the Curt R16 roller part #C16560 like what you have on your Curt Hitch.

view full answer...

Answer 11

The Sidewinder pin boxes are pin box specific replacements so you will need to know the pin box of your new camper. For instance if it has an extended pin box like the most common Lippert 1621 extended pin box, then you would use the 20K #RP34FR.…

view full answer...

Answer 12

The Demco Recon, part #DM8550045 that you referenced cannot be used with rotating pin boxes like Sidewinders so if the trailer you just bought has a Sidewinder you'd need to lock it out so that you can use a slider hitch. You will first need to…

view full answer...

Reese Sidewinder 5th Wheel Pin Box With Rotating Turret Compatibility With RBW 7019 Pin Box

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching