Disc Brake Kit for 1999 Stratos Tandem Axle Boat Trailer
Question:
Hello I have a 1999 Stratos tandem axle boat trailer. I currently have the UFP DB42 calipers at all 4 wheels. I would like to upgrade to the Kodiak disc brakes. I have a 10inch disk with the 5 bolt pattern and 3500 LB axles I believe the kit I need is HRCM10DAC Can you please confirm that these will fit and all please let me know the part numbers I will need for the bearings and grease seals. I have attached the parts lists for my current set up that includes the bearings sizes and grease seals size. thank you -Dave B
asked by: David B
Expert Reply:
The disc brake kit part # T2HRCM10DAC is the correct disc brake kit for your boat trailer that has 3,500 lb axles and a 5 on 4-1/2 inch bolt pattern. For bearings you'd want the part # L68149 and # L44649, for races part # L68111 and # L44610 and then for seals part # RG06-050.
![Jameson C](https://images.etrailer.com/static/images/catg/people/371_tn.jpg)
Products Referenced in This Question
Replacement Race for L44643 and L44649 Bearings
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 1.980 Inch O.D.
- Bearing L44643
- Bearing L44649
- Race L44610
- 2000 lbs Axle
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Race for L68149 Bearing
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 2.361 Inch O.D.
- Bearing L68149
- Race 68111
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Dexter Premier Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Trailer Brakes
- Disc Brakes
- Marine Grade
- 5 on 4-1/2 Inch
- Hub and Rotor
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 3500 lbs
- Brake Assembly
- 5 on 4-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Continue Researching
- Q&A: Will 3,500 lb Kodiak Disc Brake Kit Fit 2012 EZ Loader Boat Trailer
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Most Popular Wheel Bearings
- Q&A: How to Convert Drum Brakes to Disc Brakes on a 2005 Boat Trailer
- Q&A: How to Determine if Trailer has 84 Spindle to Pick Out Replacement
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Replacement for Global Direct GDC80 Brake Actuator
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Wiring Trailer Lights with a 5-Way Plug (It's Easier Than You Think)
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: Why Were The Kodiak 204 Calipers and Pads Discontinued?
- Q&A: How do etrailer Brand Trailer Brake Assemblies Compare to Lippert and Dexter
- Q&A: How To Choose Correct MORryde Shackle Upgrade Kit