Replacement Bearings for EZ Loader Boat Trailer With 2700 lb Axle
Question:
We need to figure out what bearings or hub assembly is needed for out EZ Loader trailer. We can’t look at the old ones as they were worn right down. The VIN # is 1ZEAAAGC08A165170.
asked by: Ian R
Expert Reply:
According to EZ Loader, you have a 2.7K axle that uses BT150A oil bath hubs. If you wanted to convert to grease-lubricated hubs, we have a replacement for you. I'd go with the # CE13315 which includes the inner and outer L44649 bearings, the races, the grease seal, the dust cap and lug nuts. The grease is even included. I prefer grease to oil bath hubs because oil bath hubs are much more prone to leaks and water intrusion than grease packed hubs.
If you just wanted to replace the bearings, you'd use the # BK1-150 bearing kit.
Products Referenced in This Question
Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649
- Race L44610
- 2200 lbs Axle
- etrailer
more information >
CE Smith Trailer Idler Hub Assembly w/ Case for 2.7K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44649
- L44649
- For 2700 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- CE Smith
more information >
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 2.7K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: Bearing Kit, LM67048/25580 Bearings, 10-36 Seal
- Video: Kodiak Trailer Brakes KCMB10RD Review
- Shop: Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet and Stainless Steel - 3,500 lbs
- Shop: Replacement Mounting Bracket for Kodiak Disc Brake Caliper - Over-the-Hub - Stainless - 3,500 lbs
- Shop: Replacement Mounting Bracket for Kodiak Disc Brake Caliper - Dacromet - 3,500 lbs
- Shop: Replacement Mounting Bracket for Kodiak Disc Brake Caliper - Integrated Rotor - Dacromet - 3,500
- Shop: Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet and KodaGuard - 3,500 lbs
- Q&A: How To Tell If Bearing Buddy Has Enough Grease
- Search Results: sp~212275
- Search Results: apt4
- Video: Rhino-Rack Sunseeker Awning Review
- Q&A: How Much Grease Should be Added to the Bearing Buddy Bearings
- Search Results: 12192tb
- Search Results: ce13315
- Search Results: ce13311
- Search Results: cotter pin
- Search Results: hub kit
- Q&A: Identifying Nut Used For Hub Installation On Boat Trailer With AutoFlex-Knott Axle
- Q&A: Replacement Hubs for a 1998 Tracker TrailStar Boat Trailer
- Q&A: Replacing Trailer Axle Spindle From Older Short Spindle To BTR E-Z Lube Spindle
- Q&A: Does etrailer Trailer Hub Assembly # AKIHUB-545-2-2K Come Pre-Assembled and Greased
- Q&A: Which Replacement Hub for Shoreland'r SLR22L Boat Trailer