Matte Black Ladder Rack For 2021 Toyota Tundra

Question

Question:

Will this system work with a 2021 Tacoma and Can you get it in matte black?

asked by: Heather C

0

Expert Reply:

The Thule TracRac TrackONE # TH27000XT-XK4EX will fit your 2021 Toyota Tacoma, but the cantilever version does not come in black. Here is the TracRac TracONE # TH27000XTB-501 in matte black!

expert reply by: Adam E

0

Answer 1

From the pictures you sent, it looks like you have the deck rail system on your Tacoma. If that is the case then the difference in the Thule TracRac TracONE Ladder Rack w Cantilever #TH27000XT-500EX for the 2014 Tacoma and the Thule TracRac TracONE…

view full answer...

Answer 2

To carry lumber and tools with your 2023 Toyota Tacoma you are going to want the Thule TracRac TracONE Truck Bed Ladder Rack item #TH27000XTB-XK4B. This fits both the 5 foot beds and 6 foot beds with the deck rail system. The Thule ladder rack system…

view full answer...

Answer 3

Hey Shannon, thanks for reaching out! Sounds like you're looking for the Thule Xsporter Pro #TH500XTB-THXK3 for your 2008 Toyota Tacoma with the Deck Rail System. This is adjustable up and down as well as along the Deck Rail System so you get the…

view full answer...

Answer 4

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 5

The Rhino-Rack Roof Rack for Factory Tracks #Y02-490B-NT is going to be your best bet for the tracks on the ARE topper for your 2012 Toyota Tacoma. The weight capacity is 220 lbs like you mentioned, but that's going to be the highest you'll…

view full answer...

Answer 6

The 7290 that you see is a casting number. It is found on AL-KO hubs that fit #99 spindles. I found that the bearings used are #28580 which would be the inner bearing and #25580 which would be the outer bearing. For the seal use #91030.

view full answer...

Answer 7

I recommend the Redarc Tow-Pro Liberty Brake Controller #RED24FR for your 2023 Toyota Tacoma with the factory tow package. You will be able to connect the wiring using the Redarc Adapter #RED99FR directly to the factory connector. We also have the…

view full answer...

Answer 8

Yakima's Skyline towers part #Y53TR can fit the tracks of the Retrax XR that you have with the landing pad 1 part #Y00221 but there isn't a way with the Baseline towers. Your Yakima Corebar or Jetstream bars will work with the Skyline towers…

view full answer...

Answer 9

It is possible to cut the Rhino-Rack crossbars but I do not recommend this as it will certainly void the warranty. Since we offer Rhino-Rack's Vortex Aero bars in various lengths you can simply choose the individual parts you prefer to make up…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

The Redarc Tow-Pro Liberty Brake Controller #RED24FR you were looking at is a great choice for your 2021 Toyota Tacoma due to only the control knob being visible once installed which makes it look like a factory option. To install the #RED24FR in…

view full answer...

Matte Black Ladder Rack For 2021 Toyota Tundra

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching