Spindle, Brake Flange, Hub, & Electric Brakes For Custom 5,200 lb Axle
Question:
I am building a custom 5200k axle. I am using a 2”x3” tube with a wall thickness of .250. I am needing to know what part numbers to use from your website so that I know I am ordering the correct items. Spindle for 5,200-lb to 7,000-lb Trailer Axles? Brake Mounting Flanges? Trailer Idler Hub Assembly for 5,200-lb E-Z Lube Axles - 6 on 5-1/2? can you use 5x4.5 in? Electric Trailer Brake Kit - 12inch - Left- and Right-Hand Assemblies - 5,200 lbs. to 7,000 lbs.?
asked by: Bob
Expert Reply:
We can get you all set up with the correct parts you need for your custom 5,200 lb axle, including the spindle, flange, hub, and electric brakes. Since you want to use electric brakes you'll need a hub and drum assembly, and it will need to be a 6 on 5-1/2" bolt pattern as there aren't any with a 5 on 4-1/2" bolt pattern for that capacity. Here is the list of everything you will need:
- #42 Spindle for 5,200-lb to 7,000-lb Trailer Axles # TRU57FR
- Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - Pre-Greased # AKHD-655-6-K
- Brake Mounting Flange for 3" Round Axle # 4-44-1
- Electric Trailer Brake Kit - Self-Adjusting - 12" - Left and Right Hand Assemblies # AKEBRK-7-SA
- Mounting Bolts and Hardware for 12" Brake Assemblies # BRKH12
This will be everything you need, as the hub and drum assembly does come with the correct bearings and seal to fit the spindle, and is pre-greased with the bearings, races, and seal already installed.
Products Referenced in This Question
etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 12 x 2 Inch Drum
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- etrailer
more information >
Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- 25580
- 15123
- For 5200 lbs Axles
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Mounting Bolts and Hardware for 12" Brake Assemblies
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Hardware
- 12 Inch
- Bolts
- Redline
more information >
#42 Spindle for 5,200-lb to 7,000-lb Trailer Axles - 2-1/4" Diameter
- Trailer Spindles
- Standard Spindle
- 2-1/4 Inch Diameter
- Round
- For 5000 lb Axle
- For 6000 lb Axle
- For 7000 lb Axle
- TruRyde
more information >
Product Page this Question was Asked From
Brake Mounting Flange for 3" Round Axle
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Brake Mounting Flange
- 12 Inch
- 3 Inch Diameter Axle
- Redline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Adding Brakes to a Mobile Home Axle
- Article: Adding Electric Over Hydraulic Disc Brakes
- Q&A: Adding a 7-Way Trailer Wiring Harness to a 2008 Ford E-150 Van with Factory 4-Way
- Q&A: Bolt Pattern of 5 Bolt Brake Mounting Flange for Trailer Brakes
- Q&A: Disc Brake Kit Recommendation for Lippert 7k Axles
- Q&A: How Long is the DeeMaxx Trailer Wheel Lug Nut
- Q&A: Availability Of 12" Replacement Brakes For Kelsey Hayes 4-Bolt Pattern With 3-1/2" Center Hole
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Brake Flange Needed to Install 12 Inch Brake Assemblies With 5 Bolt Mounting Holes
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Article: Slipper Spring Trailer Suspension System Review