Does The Valterra Entry Door Window Frame Exterior A77051 Include The Complete Frame and Glass?  

The Valterra Replacement Window Frame for RV Entry Doors #A77008 is the closest window frame replacement we carry to match your 15" wide by 25 1/4" window that measures in at 15 3/4" wide and 25" long, with an…

As long as you're using frames that are the same size as your window cutout, you can replace the frame and glass without any issues. The Deluxe Window Frame for RV Entry Doors - Black #37211021 is held together with screws like you mentioned…

It depends on the part. For example, the Valterra frame and glass you were looking at, part #A77051, does not include the seal. It's just the frame, glass, and mounting hardware. On the other hand, part #LC363370 from Lippert is the frame,…

Yes, the interior frame part number #A77012 that you referenced does screw to the exterior frame part #A77008 that you referenced and that's how the two pieces are held together. The interior frame has screw holes and then the outside frame…

Although I don't know if the Lippert Components Replacement Window Frame #LC363370 will fit your 2017 Puma XLE Lite, I can give you some measurements so that you can see if they match up with your current frame. The frame measures…

I went out to our warehouse to take a look at the Lippert Components Inner and Outer Entry Door Frame #LC363370 referenced in your question. I measured an inside channel dimension of right at 1 inch. I have attached an image with this dimension…

The Valterra Replacement Window Frame #A77012 is just the interior frame. The exterior piece is #A77008. They are both 15-3/4" wide x 24-3/4" tall overall and accept a 12" wide by 21" tall piece of glass. If you…

The Valterra frame and glass you refer to, #A77051 does not include the seal, it is the frame, glass, and mounting hardware as stated on the product page. I recommend you use Alpha Systems Butyl Tape for RV Weatherproofing, #AL28FJ as this creates…

The Deluxe Window Frame for RV Entry Doors, #37211021, uses #6 flat head x 1-1/2" long screws for installation.

I don't have specific RV fit info for the Valterra Frame Assembly #A77051 that you referenced but the good news is that this is designed to fit most RV applications as long as the opening measures 12 inch by 21 inch.

I verified with Lippert that the glass that comes with the Lippert Thin Shade Complete Window Kit #LC806621 measures 12 inches wide x 21 inches tall. This is a snap-in window frame, so you may not be able to retrofit it, and it is also smaller, so…

Since the door in question does not already have a window in it then Valterra Frame Assembly and Glass for RV Entrance Door - 12" x 21" Item #A77051 provides the frame and glass as well as 8 screws for installation. Any sealant such…