Recommended Hub For Reliable BT150A Axle
Question:
Good Morning. I am looking for a hub kit number that will be compatible with a Reliable BT150A axle/hub. I found Item # AKIHUB-545-2-1K, but wasnt sure it would fit. Thanks for helping out.
asked by: Andy
Expert Reply:
The Trailer Idler Hub Assembly for 2K Axles # AKIHUB-545-2-1K you were looking at may fit your Reliable BT150A axle, but based on my research it may use the # L44643 bearings like the # AKIHUB-545-2-1K, or may use # L44649 bearings.
The only way to be sure is to remove one of your current hubs and look for the bearing numbers stamped in the face of each bearing as shown in the included picture of the # L44649.
If your hubs use the # L44643 the # AKIHUB-545-2-1K would be correct.
If your hubs use the # L44649 the # AKIHUB-545-2-G-EZ-2K would be correct.
I included videos for each of the products mentioned for you to take a look at.
Products Referenced in This Question
Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Replacement Trailer Hub Bearing - L44643
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.000 Inch I.D.
- Bearing L44643
- Race L44610
- 2000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Continue Researching
- Video: Review of Timken Trailer Bearing - Replacement L44649 Trailer Wheel Bearing - TMK29FR
- Video: Review of Timken Lubricants Sealants Adhesives - Hi Temp Red Grease Disc Drum Brake - TMK79ZR
- Shop: Replacement Trailer Hub Bearing - L44649
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Video: TruRyde Trailer Bearings Races Seals Caps - Seals - RG06-020 Review
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Shop: Cotter Pin - 1/8" Thick x 1-3/4" Long
- Shop: Grease Seals (pair)
- Shop: Timken Hi-Temp Red Grease for Disc and Drum Brakes - 1-lb Tub
- Shop: Timken Replacement Trailer Wheel Bearing - L44649
- Shop: Replacement Trailer Spindle Jam Nut
- Q&A: Finding Replacement Hubs for Older Trailer
- Search Results: ce13315
- Video: Review 2 of Dexter Axle Trailer Axles - Leaf Spring Suspension - 7359765
- Video: Review of etrailer by AxleTek Trailer Axles - 2,000 lbs 60 Inch Long Axle with Idler Hubs - e25GR
- Q&A: Correct Replacement Hub For Jet Ski Trailer With BT150 Hub
- Video: CE Smith Trailer Hubs and Drums CE13215 Review
- Q&A: Recommended Galvanized Trailer Hub And Drum Kit For A 1 Inch Spindle
- Q&A: Replacement Spindle for Procraft Trailer
- Search Results: bt150a
- Search Results: trailer leaf spring bushings
- Video: Review of Kenda Trailer Tires and Wheels - Tire Only - AM10130
- Q&A: Replacement Recommendation for TDE 46210 Hub
- Q&A: Which Hubs Can Be Used to Replace the Hubs on a UFP H-1062-3
- Search Results: ez loader trailer parts
- Search Results: ez loader trailer partsaj1
- Search Results: grease seal 10 19
- Search Results: short hub
- Article: How to Measure a Trailer Axle
- Shop: Fifth Wheel Hitch