Determining If 2" Lubed Dust Cap and Plug DC200L-DCRP Will Fit Flat Bed Trailer
Question:
I am looking for lube cable bearing caps for a flat bed trailer. The existing dust cap measures 1.98 inches right next to the rim on the cap. I was looking at the 2 Lubed Dust Cap and Rubber Plug - 1.99 x 1.40 x 1.18. However I wasnt sure if that would be the correct size needed.
asked by: Rick M
Expert Reply:
It is possible that the 2" Lubed Dust Cap & Rubber Plug # DC200L-DCRP will fit your hubs, but to determine the fit you will need to remove the dust cap and measure the hub bore as shown in the included picture.
If your hub bore measures 1.99" the # DC200L-DCRP you were looking at would be a great option.
If you have a different hub bore measurement just let me know and I would be happy to confirm the correct dust cap for you.
I included a video of the # DC200L-DCRP for you to take a look at.
Product Page this Question was Asked From
2" Lubed Dust Cap & Rubber Plug - 1.99" x 1.40" x 1.18" - Qty 1
- Trailer Bearings Races Seals Caps
- Caps
- E-Z Lube Grease Cap
- 1.98 Inch O.D.
- TruRyde
more information >
Continue Researching
- Search Results: ez lube dust cap
- Shop: 2" Lubed Dust Cap & Rubber Plug - 1.99" x 1.40" x 1.18" - Qty 1
- Shop: Replacement EZ Lube Drive-In Grease Cap - 1.986" OD - Qty 1
- Article: Most Popular Wheel Bearings
- Q&A: USA Made Bearing Kit For An AL-KO 4,400 lb Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Measure a Trailer Axle
- Q&A: Replacement Grease Seals For TRP GS-1719DL
- Q&A: Dimensional Drawing for Dutton-Lanison Rigid Marine Jack
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Recommended E-Z Lube Hub and Rotor Assembly for 6K Axles
- Q&A: Replacement Microwave for my High Pointe EC942K9E in Stainless
- Q&A: How to Measure a Trailer Hub for the Correct Size Grease Cap
- Q&A: What Might Cause a Grease Cap to Keep Coming Off of the Hub Assembly On a Boat Trailer
- Article: Trailer Wiring Diagrams
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers