Determining Which Replacement Hubs and Wheels and Tires Fit Older Canadian Boat Trailer.
Question:
I want to replace my trailer hubs and wheels and tires. How can I tell what kind of hub I need? Its a 31 year old Canadian boat trailer. Thanks.
asked by: Ed B
Expert Reply:
I would be happy to help you find the correct replacement hubs and wheels and tires for your older Canadian boat trailer.
First you will need to determine which bearings your spindles use. To do this you will need to remove one of your current hubs and look for the bearing numbers stamped in the face of each bearing as shown in the included picture of the # L44649.
If you bearings are worn to the point that you cannot read the bearing numbers you will need to use digital calipers like # PTW80157 to precisely measure your spindle according to the included diagram.
For example the Trailer Idler Hub Assembly for 2,000-lb E-Z Lube Axles - 5 on 4-1/2 - Galvanized # AKIHUB-545-2-G-EZ-2K uses inner and outer bearing # L44649 and has a galvanized finish making it perfect for a boat trailer. If this matches the bearing combination on your spindle this would be a great replacement option.
The correct wheels will be dependent on the bolt pattern of the hub. The # AKIHUB-545-2-G-EZ-2K uses the common 5 on 4-1/2" bolt pattern so you would need a wheel with that bolt pattern.
To make sure the wheel and tire combination you choose will fit your trailer you will want to keep the overall tire height and width close to what is already on the trailer.
If you can tell me what size tires you currently have, and the bearing combination of your spindle I would be happy to make a recommendation for you.
I included videos of the products mentioned for you to take a look at.
Products Referenced in This Question
Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Continue Researching
- Q&A: Recommended Replacement Hubs For BT-150 Trailer Idler Hubs
- Article: Most Popular Wheel Bearings
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: How to Determine if Trailer has 84 Spindle to Pick Out Replacement
- Q&A: How to Confirm Correct Size of Grease Seal
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Q&A: Comparing the E-Z Lube Hubs to the Standard Hub Assemblies for Trailer Axles
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Trailer Wiring Harness Recommendation for 2017 Lexus RX 350 with Towing Package
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Wheel and Tire Replacement to Go From Tire Size 7-14.5 to ST205/75-14
- Article: How to Measure for Trailer Hitch Drop
- Article: Trailer Wiring Diagrams