Recommended Ball Mount With 5" Rise Compatible With Friction Sway Control
Question:
Im looking for a 2 inch ball mount with a 5 inch rise compatible with a sway bar bracket. I would prefer the mount is adjustable but not required if the rise is between 4-5 inches. Thanks for the help.
asked by: Brian M
Expert Reply:
I recommend the Curt Ball Mount for 2" Hitches - 5" Rise, 6-1/8" Drop - 9-3/8" Long - 10,000 lbs # C45336 which has the 5" rise you mentioned you needed, and can be used with friction sway control like the Curt Friction Sway Control for Weight Distribution Systems # 17200 by using the Reese Sway-Control Bracket for 2" Ball Mounts # RP26003. At this time we do not have an adjustable ball mount that is compatible with the # RP26003.
The # C45336 has a 1-1/4" ball mounting hole so you will need to use 2" hitch ball # A-90 or 2-5/16" hitch ball # 19286 to match the coupler on your trailer.
I included a video of the products mentioned for you to take a look at.
Products Referenced in This Question
Curt Friction Sway Control for Weight Distribution Systems
- Accessories and Parts
- Weight Distribution Hitch
- Sway Control Parts
- CURT
more information >
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 12,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-3/4 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 12000 lbs GTW
- Class IV
- Class V
- Draw-Tite
more information >
2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-5/8 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 10000 lbs GTW
- Class IV
- Class V
- CURT
more information >
Reese Sway-Control Bracket for 2" Ball Mounts - Class III and IV
- Accessories and Parts
- Weight Distribution Hitch
- Adapters
- Sway Control Parts
- Brackets
- Reese
more information >
Product Page this Question was Asked From
Curt Ball Mount for 2" Hitches - 5" Rise, 6-1/8" Drop - 9-3/8" Long - 10,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1-1/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 6 Inch
- Rise - 5 Inch
- Fits 2 Inch Hitch
- 10000 lbs GTW
- Class IV
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Measure for Trailer Hitch Drop
- Q&A: What is the Difference Between Load Range C and D ST175/80D13 Trailer Tires
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Q&A: Replacement Trailer Light Lens with SAE P2A 01 DOT on Front of Lens
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: The 5 Best Trailer Drop Hitches You Can Buy
- Q&A: Is Hitch Ball # A-90 Correct for Curt Ball Mount C45336
- Q&A: How Tall is 2 Inch Diameter Hitch Ball Part # 19247
- Q&A: Can a Trailer Ride With the Tongue at an Upward or Downward Angle
- Q&A: How to Increase Height of Hitch Ball by 2-Inches
- Article: Snow Tire Chain Overview: How to Buy the Right Tire Chains
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch