3500lb Axle Hydraulic Brake Assembly with Drum, Bearings and Seals
Question:
Can you get and how much for 1 ea. Dexter K0230-330-00 left side 3500 axle hydraulic backing plate assembly with park brake and a drum assembly with with bearings and seal. Thanks
asked by: Steve M
Expert Reply:
Dexter Hydraulic Drum Brake Assembly - Uni-Servo - 10" - Left Hand # 23-312 would be the closet thing we have but it does not have the parking brake. For the Drum Assembly # AKHD-545-35-K is what I recommend giving the following is correct. It does not have EZ lube spindles, you have a 5 on 4-1/2" wheel bolt pattern (see link below for how to measure) and the same bearing Inner bearing: L68149 (1.378" inner diameter) Outer bearing: L44649 (1.063" inner diameter) and seal Inner diameter: 1.719" Outer diameter: 2.565" (picture for reference). If what you have is different please let me know so that I can find you the right one.
Products Referenced in This Question
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Dexter Hydraulic Drum Brake Assembly - Uni-Servo - 10" - Left Hand - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Hydraulic Drum Brakes
- LH
- 3500 lbs
- Brake Assembly
- Single Servo
- 10 x 2-1/4 Inch Drum
- Dexter
more information >
Continue Researching
- Shop: Replacement Trailer Hub Bearing - LM67048
- Shop: Replacement Trailer Hub Bearing - LM11949
- Shop: Replacement Trailer Hub Bearing - L44649
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Search Results: timken bearing for dexter 3500 lb axles
- Shop: Spindle Grease Seal Set for LM48548 or L68149 Inner Bearing and 1.980, 1.968 or 2.562 Bearing Buddy
- Shop: Bearing
- Search Results: lug nuts
- Shop: Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles - Qty 2
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Article: Most Popular Wheel Bearings
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Hitch
- Search Results: 25580
- Search Results: 44649
- Video: Bearing Repacking and Grease Seals Installation
- Shop: Trailer Wiring
- Q&A: What is the Best Grease for Trailer Bearings
- Article: Trailer Wiring Diagrams
- Shop: Brake Controller
- Q&A: Proper Way to Tighten Trailer Spindle of Castle Nut
- Article: Trailer Tire Sizing
- Search Results: 68149
- Search Results: 14125a
- Q&A: Correct Bearing Kit for 2019 Jayco North Point 315RLTS
- Shop: Gooseneck Hitch
- Video: etrailer Electric Trailer Brake Kit Installation
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: USA Made Bearing Kit For An AL-KO 4,400 lb Axle
- Video: Remove, Inspect, and Reinstall Trailer Bearings, Race, and Seals Demonstration