Troubleshooting Trailer Taillights that Have Power but Do Not Function
Question:
The light kit i was sent ,Im having trouble getting the lights to make a good connection . I connected as should be and the lights have no power to bulbs.al wiring has power but no connection to bulb
asked by: Joseph L
Expert Reply:
Are you referring to the trailer wiring kit you bought from us or the trailer lights I see that you ordered at same time?
I would assume it's the light kit part # TL29BK which since you tested and the lights have power ran to them that would indicate the issue is the ground circuit. These ground through the mounting hardware so make sure they are mounted to a clean metal surface. If you tested them before mounting them that would be why they aren't functioning since they wouldn't be grounded.
Product Page this Question was Asked From
Standard Trailer Light Kit with 25' Wire Harness
- Trailer Lights
- Tail Lights
- License Plate
- Rear Reflector
- Side Marker
- Side Reflector
- Stop/Turn/Tail
- Square
- Kit
- Surface Mount
- Non-Submersible Lights
- Incandescent Light
- 5L x 4-1/2W Inch
- Red and Amber
- Optronics
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: Most Popular Wheel Bearings
- Article: 2023 Best Gifts for RVers & Campers
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Dimensions Of Curt Custom Underbed OEM-Style Gooseneck Trailer Hitch C60633
- Article: Trailer Maintenance Schedule
- Q&A: The Function of the Auxiliary 12-Volt Connection on the 7-Way Trailer Connection
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Ways to Install New 4-Pole Trailer Connector
- Q&A: ST205/75/15 Spare Wheel And Tire Combo For A 1974 Pull Behind Camper
- Q&A: GloBrite 126R/126Y Red Replacement Light
- Q&A: Color of Light Output for the Optronics Flexible LED Light Strip # UCL90CB
- Q&A: How to Rewire an Old Cattle Trailer
- Article: How to Measure for Trailer Hitch Drop