Weight Distribution System Option for a 2005 Toyota 4runner V8 4x4 SR5 7000 lbs Towing 32ft Trailer
Question:
Im looking at towing a 32 foot trailer that weights 5500 lbs dry. What would you recommend for a WDH with sway control? 2005 Toyota 4runner V8 4x4 SR5 7000 lbs towing
asked by: Dustin H
Helpful Expert Reply:
There are many different weight distribution systems on the market and one of the most important factors to consider when choosing a weight distribution system is the tongue weight of your set up. This includes the fully loaded and ready to tow tongue weight of your trailer plus the weight of any cargo that is loaded in the bed of your truck behind the rear axle. You will want to choose a weight distribution system with a tongue weight range that encompasses the fully loaded tongue weight of your set up.
I have attached an FAQ article on how to determine your tongue weight for you to check out. The tongue weight of a trailer is typically 10 to 15 percent of the gross trailer weight.
Since you will be towing a 32 ft trailer that could be approaching the towing capacity of your 2005 Toyota 4Runner, I recommend looking into a system that has integrated sway control like the Reese Steadi-Flex systems. If you find that the tongue weight of your set up will be between 600 lbs and 1,200 lbs, then I recommend looking at the Reese SC System, # RP66560. The Reese Steadi-Flex systems do not come with a hitch ball, so you will want to be sure you pick up a hitch ball with the system. For a 2 inch hitch ball, use # A-90, for a 2-5/16 inch ball, use # 19286.
If you find that your tongue weight does not fall within the 600 lb to 1200 lb range, then let me know what the tongue weight of your setup is and I can give you a more specific recommendation. I have also attached a link to all of our Reese systems for you to check out.
Products Referenced in This Question
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 12,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-3/4 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 12000 lbs GTW
- Class IV
- Class V
- Draw-Tite
more information >
2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-5/8 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 10000 lbs GTW
- Class IV
- Class V
- CURT
more information >
Product Page this Question was Asked From
Reese Steadi-Flex Weight Distribution System w/ Sway Control - Trunnion - 12K GTW, 1.2K TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 1000 lbs
- 1100 lbs
- 700 lbs
- 800 lbs
- 900 lbs
- Reese
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Determining Trailer Tongue Weight
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Q&A: Recommended Weight Distribution System for a 6,800 lbs 2019 Lance 2465 Travel Trailer
- Q&A: Surge Brake Compatible Weight Distribution System Recommendation
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Article: How to Measure for Trailer Hitch Drop
- Article: Best Hitches for Travel Trailers (2022) - For a Smooth, Sway-Free Ride
- Q&A: Recommendation for Upgrading From Fastway Weight Distribution Hitch
- Article: Most Popular Wheel Bearings
- Q&A: Maximum Towing Capacity of 2014 Chevy Traverse
- Q&A: Blue Ox SwayPro VS TrackPro Weight Distribution System
- Q&A: Can You Back Up Trailer with Reese Dual Cam II Weight Distribution System Installed
- Q&A: Correct Gen-Y Pin Box to Replace a MORryde RPB72-1716