Determining Replacement Brake Assemblies And Hub And Drums For 2010 Copper Canyon
Question:
Do you know what axle rating I have on my 2010 copper canyon. The brakes need to be replaced,they are 10” with 6 lug drums. I need new drums and new brake assembly’s. If you can help that would be helpful.thank you
asked by: Richard H
Expert Reply:
I would be happy to help you determine the correct replacement braking and hub and drum assemblies for your 2010 copper canyon, but unfortunately I do not have a breakdown of axles used by model.
To determine the correct replacement hub and drums you will need to find which inner and outer bearing your spindles use.
The easiest way to do this is by removing one of your current hubs and looking for the bearing number stamped in the face of each bearing as shown in the included picture of the # L44649.
For example the Trailer Hub and Drum Assembly - 3.5K E-Z Lube Axles - 10" Diameter - 6 on 5-1/2 - Pre-Greased # AKHD-655-35-EZ-K uses inner bearing # L68149 and outer bearing # L44649. This would be a great option if this is the same bearing combination your spindles use due to it using 10" brakes that you mentioned are currently on your trailer, and it has the 6 on 5-1/2" bolt pattern you mentioned.
For braking assemblies you would want the Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies - 3,500 lbs # AKEBRK-35-SA and mounting hardware # BRKH10B.
If you can tell me the bearing combination of your spindles I would be happy to confirm the correct components for you.
I included videos for the products mentioned for you to take a look at.
Products Referenced in This Question
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Mounting Hardware for 10" Brake Assemblies
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Hardware
- 10 Inch
- Redline
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: Replacement 3500 lb Hub/Drum for TruRyde RVD-H-65535 10 Inch Trailer Brake Drum
- Q&A: Replacement For A Truryde RVD-H-65535 Hub
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Hub and Drum Assembly for Lippert 4.4K 136214 Hub and Drum
- Article: Trailer Tire Sizing
- Q&A: Parts Needed to Replace 12" Disc Brakes with Electric Drum Brakes
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Maintenance Schedule
- Q&A: Replacement Brake Assembly for Axletek 44-GG
- Article: Trailer Wiring Diagrams
- Q&A: 6k Hub Drum that Can Fit Timbren Axle Less Kit part # ASR1THDS03
- Q&A: Can I Install Brakes On Only One Axle Of A 2 Axle Trailer And Which Axle Should They Go On?
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer