Hidden 2 inch Trailer Hitch that Fits 2021 Audi A5 Cabriolet

Question

Question:

I am planning on purchasing an Audi A5 cabriolet and need a 2 inch hitch receiver for my Thule bike rack. The rack plus bikes weighs about 100#. You appear to sell such a rack but do you have a local installer in Columbus Ohio since it is something I am not comfortable doing myself on a brand new car.

asked by: David H

1

Helpful Expert Reply:

For your 2021 Audi A5 Cabriolet convertible we do have the Stealth hitch part # 391AUDA5S518 which is a 2 inch hitch that will work great with your Thule bike rack. The lower portion of the hitch can also detach when not in use for a totally invisible appearance.

The trick to finding an installer will be to find a mechanic local to you with a decent reputation and let them handle the job. Hitch installs are pretty basic compared to what mechanics usually deal with so finding one who'd be willing to do the job should be a pretty simple task.

expert reply by: Jameson C

1

Answer 1

For your 2021 Audi Q5 convertible I recommend the Stealth Hitches Hidden Rack Receiver item #391AUDA5S518. This is a custom fit 2" receiver that requires no drilling to attach to your vehicle. It has a maximum tongue weight of 350 lbs and has a…

view full answer...

Answer 2

Yes, you will need to trim a small section of your rear fascia on your 2023 Audi S5 to use the Stealth Hitches Hidden Rack Receiver #391AUDA5S518. I have included an image below showing the area needed trimmed on your 2023 as it is different than…

view full answer...

Answer 3

Yes we do. For your 2023 Audi S5 we do have hidden hitches that are a fit from Stealth. For that you would want the part #391AUDA5S518. Or if you planned on ever doing some towing you'd want the #391AUDA5S518T which comes with a ball mount…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 6

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 7

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 8

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 9

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 10

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 11

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 12

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Hidden 2 inch Trailer Hitch that Fits 2021 Audi A5 Cabriolet

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching