How To Find Correct Replacement Leaf Spring Hangers for a Trailer
Question:
I installed the EZ suspension system in my 3 axle 2015 Keystone Fuzion toy hauler. My rear leaf spring mounts on both sides are pretty worn out. Bolt holes elongated. They are welded on. Is it possible to buy the mounts. I would have a shop remove and weld on the new mounts. Thanks.
asked by: Dave V
Helpful Expert Reply:
It sounds like you are looking for new leaf spring hangers which we do offer replacements for. In order to get the correct ones you'll need to do some measuring. The measurement you're looking for is the distance from the top of the hanger to the center of the mounting hole. The Hanger for Double-Eye Springs part # 28-5 for example measures 3-1/4" tall. I have attached a full list of options below.
Product Page this Question was Asked From
Front/Center/Rear Hanger for Double-Eye Springs - 3-1/4" Tall - 9/16" Bolt Hole
- Trailer Leaf Spring Suspension
- Hangers
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- 9/16 Inch Diameter
- 3-1/4 Inch Tall
- Single Axle
- Tandem Axle
- Triple Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Suspension Enhancement
- Shop: Trailer Wiring
- Search Results: f2097
- Search Results: 2709
- Search Results: f2709
- Shop: Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector
- Q&A: How to Determine Correct Replacement Leaf Springs for 7,000 lb Axle
- Shop: Wire - Jacketed 6-Wire - per Foot
- Shop: LED Combination Tail Light for Trailers over 80" Wide - Submersible - Red - Passenger Side
- Shop: Single-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front, 1-1/4" Rear
- Q&A: How Far Apart From Each Other Should Hangers be Welded for Leaf Springs on Trailer
- Shop: GloLight Thinline LED Trailer Clearance or Side Marker Light - Submersible - Rectangle - Amber Lens
- Article: Double-Eye Trailer Suspension System Review
- Article: Brake Controller Installation: Starting from Scratch
- Search Results: 3500 lb spring
- Q&A: How Many Cold Cranking Amps Does a 2,500 Lb Winch Require
- Q&A: What Hanger Spacing Should be Used on a Trailer with 27 inch Long Leaf Spring
- Search Results: wire
- Shop: 4-Leaf Double-Eye Spring for 3,500-lb Trailer Axles - 27" Long
- Shop: LED Combination Tail Light for Trailers over 80" Wide - Submersible - Red - Driver Side
- Q&A: Lighting Requirements for Trailer that is over 80 inches in Width
- Q&A: Tool for Adjusting Drum Brakes on Drop Axle
- Q&A: Are Trailer Leaf Spring Shackles Supposed to be Angled or Totally Straight
- Video: Review of SuperSprings Vehicle Suspension - Rear Axle Suspension Enhancement - SS85FR
- Article: How to Install E-Track in 3 Easy Steps
- Search Results: lighting
- Search Results: marker lights
- Video: This Old Trailer: Replacing Leaf Springs