Charging Yeti 3000 Using CCP Port On 2019 Ford Transit.

Question:

I am considering a Goal Zero Yeti 3000 for a 2019 Transit 130 WB, with a DC-to DC charging setup from the CCP in the Transit, which I beleive to be 60amp. Do you have any harnesses to connect the 60 amp CCP to the GZ for charging? Right now I am planning to locate the GZ in the back on the passenger side. Thanks!

asked by: Tom Q

Expert Reply:

After reaching out to Goal Zero about your specific question, I've found a solution for you! There is no cable that is a direct plug and play to your Customer Connection Point Port (CCP) to the HPP port on your Goal Zero 3000 # GZ74FR, but there are two different options you have. If you have a power block or fuse panel you can get a Power Pole To Ring Terminal Connector and plug that into Yeti HPP 12V output port and connect the ring terminal to the positive and negative post of the fuse box. This cable is not offered by us but is at a couple third party manufactures.

If that is not the case, you will need to get a professionally installed power inverter # 34280177. Every car is different and precautions should be taken when wiring these up as it could damage your vehicles components or the Yeti 3000 # GZ74FR

expert reply by: Adam E