Long Ball Mount With 10 Inches of Rise for 2 Inch Trailer Hitch
Question:
I have a 2011 Chrysler Town and Country, equipped with one of your 2 hitch/receivers designed for this vehicle. I need to tow a trailer with a 21 hitch height, which is a 10 rise. I need at least 7 of clearance from the hitch pin hole to clear the bumper. Do you have a product that I can use for this purpose?
asked by: Edward T
Expert Reply:
There is one ball mount that meets your criteria for 10 inches of rise as well as more than 7 inches of clearance from the hitch pin hole to the hitch ball:
- Draw-Tite Ball Mount # 80248
This ball mount will give you 9-3/4 inches of rise (that 1/4 inch is not a factor; you just need to be within an inch or so of level) and measures from 9 inches from the center of the hitch pin hole to the center of the hitch ball.
For a hitch ball, depending on your trailer's coupler you will need either 1-7/8" Hitch Ball # C40002 or 2" Hitch Ball # 63845.
Then to secure it to your hitch you can use Pin and Clip # PC3 or lock it with Trailer Hitch Receiver Lock # e98880.
Products Referenced in This Question
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Tow Ready
more information >
Draw-Tite Ball Mount - 9-3/4" Rise, 11" Drop - 9" Long - 3,500 to 5,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 11 Inch
- Rise - 10 Inch
- Fits 2 Inch Hitch
- 5000 lbs GTW
- Class III
- Draw-Tite
more information >
etrailer Trailer Hitch Receiver Lock for 2" Hitches - Flush - 2-5/8" Span - Chrome
- Trailer Hitch Lock
- Standard Pin Lock
- Keyed Alike
- Chrome
- Fits 2 Inch Hitch
- Flush Pin
- 2-5/8 Inch Span
- etrailer
more information >
Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-1/4" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- 5/8 Inch Diameter
- 4 Inch Span
- Draw-Tite
more information >
Product Page this Question was Asked From
1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 3500 lbs GTW
- Class III
- CURT
more information >
Continue Researching
- Article: How to Measure for Trailer Hitch Drop
- Article: My Trailer Hitch Doesn't Fit
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: What Is An OEM Prep Package And How Do I Know If I Have It
- Article: Rooftop Cargo Carriers
- Article: Rust Prevention
- Article: Trailer Wiring Diagrams
- Q&A: Towing Kit For Stealth Hitches Rack Receiver on 2015 Audi Q5
- Q&A: Mostly Hidden Trailer Hitch that Fits 2019 Jeep Grand Cherokee Limited
- Q&A: Recommended Trailer Hitch and Wiring for 2019 Jeep Grand Cherokee
- Q&A: Replacement Bolts for Installation of Draw-Tite Hitch # 75699
- Q&A: Trailer Hitch and Wiring for 2019 Jeep Grand Cherokee Towing Boat Trailer
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Choose the Right Trailer Hitch Class