Determining Correct Hub To Replace Freedom Hub With F 612 Engraved On It
Question:
Where can you fine replacement?
asked by: Dean
Expert Reply:
I would be happy to help you determine the correct replacement hub to replace your Freedom hub that has F 612 engraved on it, but I was unable to find any information on that specific hub.
Instead you will need to pull one of your hubs to identify which inner and outer bearings your spindles use, and the bolt pattern of your wheels.
There are two ways to identify which bearings your hubs use, the easiest way is to read the numbers stamped on the face of the bearing as you can see in the included picture of the # L44649.
If your bearings are worn to where you cannot read the number, you will need to use digital calipers like # PTW80157 to precisely measure your spindles according to the included diagram.
Lastly I have included a helpful article that will walk you through how to measure the bolt pattern of your wheels.
![Samuel C](https://images.etrailer.com/static/images/catg/people/2240_tn.jpg)
Products Referenced in This Question
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Wiring Diagrams
- Q&A: How to Determine if Trailer has 84 Spindle to Pick Out Replacement
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Recommended Hub & Drum & Brakes That Measures 10 x 2 1/4" and has a 5 on 4 1/2 Bolt Pattern
- Q&A: Replacement Grease Seals For TRP GS-1719DL
- Q&A: How to Tell if a Trailer Spindle is Damaged or Needs to be Replaced
- Q&A: USA Made Bearing Kit For An AL-KO 4,400 lb Axle
- Q&A: Can Electric Brakes be Used on a Boat Trailer
- Q&A: What is the Best Grease for Trailer Bearings