How Much Do the Tire Grip Vehicle Traction Recovery Tracks Weigh

Question

Question:

How much do they weigh? Thanks

asked by: Merle M

0

Expert Reply:

The Tire Grip Vehicle Traction Recovery Tracks for Snow, Mud, and Sand - Qty 2 # 288-07411-2 weigh about 6-1/2-lbs each, so they're easy to move around and get situated when you need to use them.

expert reply by: Erik B

0

Answer 1

I attached a picture that shows how the cable attaches to the slats. As well as a picture that shows the thickness of the slats being 18.67 mm. This is the only width we have available currently and hopefully soon we have a demo video but at this…

view full answer...

Answer 2

Some newer cars, vans and small trucks, especially those with large, aftermarket tires, may require the use of Class S chains. Class S tire chains are designed for use on vehicles with restricted wheel well clearance. I have attached a photo that…

view full answer...

Answer 3

I have a set that will work however your 2023 Chevy Suburban's owners manual says not to use tire chains because of clearance issues on the inner part of the tires. You can find this information on page 370. To avoid damaging brake lines and…

view full answer...

Answer 4

The NOCO Genius charger part #329-GENIUS2 that you referenced would perfectly for this. It is a 2 amp charger that once the battery is fully charged will switch to a lighter charge to maintain it when stored so that when you need to use the truck it…

view full answer...

Answer 5

For the 245/50-20 tires on your 2024 Hyundai Palisade I recommend the Titan Chain Snow Tire Chains #TC2323. This is a drape-over chain and will be very easy to install. Much easier than your standard ladder-style chains. You just drape the chain over…

view full answer...

Answer 6

The Tire Grip Vehicle Traction Recovery Tracks part #288-07411-2 can be used on pretty much any surface to help improve traction so I see no reason as to why you cannot use them on a cement boat ramp with slippery algae.

view full answer...

Answer 7

The Stallion Tire Grip recovery track, part #288-07411-2 does feature metal studs on the underside that will help the mat grip the ground surface. You can get a better look at the mat by checking out the video I've linked for you.

view full answer...

How Much Do the Tire Grip Vehicle Traction Recovery Tracks Weigh

Product Page this Question was Asked From

Continue Researching