Ball Mount with a 12 Inch Drop for a Motor Home Towing a Tow Dolly
Question:
I have a class A motorhome. The 2 in hitch is rated at 5000#/500# tongue. The distance from the bottom of the RV receiver to ground is 28 in. The tow dolly recommends an 18 in height to the top of the 2in ball. The RV is not loadedit is winterized at this time. The tow dolly will apply 100# on the tongue. I can not find engineering drawings with dimensions for the bars to know how the drop is measured. Should I order the 10inch or 12inch bar?
asked by: Bill
Expert Reply:
Drop is measured from the top of the receiver opening to the top of the other receiver opening in the case of a high-low adapter like # RM-048-6 which actually has a 6 inch drop. However, these adapters cannot be used with a tow dolly per the manufacturer specifications.
What you can do is use a ball mount with 12 inches of drop, # AMSC12. For a ball mount drop is measured from the top of the receiver opening down to the ball platform like in the FAQ I have included. With this ball mount you also get an added benefit since this is a cushioned ball mount and will absorb some road shock. For a compatible ball you will need one with a 1 inch diameter shank like # C40004.
Products Referenced in This Question
Convert-A-Ball Ball Mount for 2" Hitches - 10-3/4" Rise, 12" Drop - 7,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 12 Inch
- Rise - 11 Inch
- Fits 2 Inch Hitch
- 7000 lbs GTW
- Class III
- Long Shank
- Shock Absorbing
- Convert-A-Ball
more information >
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 6,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 6000 lbs GTW
- Class III
- CURT
more information >
Product Page this Question was Asked From
Roadmaster High-Low Adapter for Tow Bars - 2" Hitches - 6" Rise/Drop - 10K GTW, 400 lbs TW
- Accessories and Parts
- Tow Bar
- Hitch Adapters
- High-Low Adapter
- Fits 2 Inch Hitch
- 6 Inch Rise/Drop
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Convert-A-Ball Ball Mount for 2" Hitches - 10-3/4" Rise, 12" Drop - 7,000 lbs
- Article: How Level Should a Tow Bar Be When Flat Towing
- Article: How to Choose a High-Low Adapter
- Article: Tire TLC: How & When to Check Your RV/Trailer Tire Pressure
- Article: Must-Have Flat Towing Components
- Q&A: How to Investigate Break Away Disconnect Issue on the Blue Ox Patriot 1
- Q&A: Is Blue Ox Patriot Compatible with 2022 Ford Bronco
- Q&A: Can Roadmaster Tow Bar Connect to Jeep Wrangler with D-Rings on Off Road Bumper
- Q&A: Spray Lubricant Recommendation for etrailer SD Non-Binding Tow Bar Maintenance
- Q&A: How to Prepare a 2023 Ford Bronco For Flat Towing
- Q&A: How to Adjust Hitch Height of RV To Allow Vehicle to Flat Tow with Tow Bar Level
- Q&A: How to Increase Height of Trailer Hitch Ball to Allow Boat Trailer to be Towed Level
- Article: Anti-Rattle Devices
- Article: RV-Mounted vs Vehicle-Mounted Tow Bars
- Article: How to Measure for Trailer Hitch Drop