Thule Kayak Carriers that Can Fit Top Channel of TracRac Sliding Ladder Racks

Question

Question:

1999 Ford F-250 and F-350 Super Duty - Thule TracRac SR Sliding Truck Bed Ladder Rack - 1,250 lbs I am looking for a way to haul Kayaks. Will all/any of the Thule kayak holders work with this rack?

asked by: Bryan N

0

Expert Reply:

Since the load bars of the Thule TracRac Ladder racks are much thicker than roof rack crossbars the types of kayak carriers that can fit them are the ones that can install in top channels.

The Thule kayak carriers that will fit into crossbar channels are:

Hullavator Pro # TH898
DockGrip # TH895
DockGlide # TH896

expert reply by: Jameson C

0

Answer 1

To avoid your bed when towing a 5th wheel on your 2017 Ford F-450, the best way to carry your couple of kayaks is to use a roof rack and a front hitch receiver with a load extender. You may not be able to use your sunroof with the kayaks installed.…

view full answer...

Answer 2

For 2 kayaks on a 2015 Ford F-150, I recommend using the TracRac Ladder Rack #TH27000XTB or the sliding rack #TH43002XT-501 or #TH43002XT-000 depending on your bed length. The sliding systems will give you better support for your kayaks. With these…

view full answer...

Answer 3

Actually both of the kayak carriers you mentioned the DockGrip part #TH895 and the Hull-A-Port #TH849000 would fit the Thule TracRac SR sliding ladder racks as they come with T-bolts that would allow the carrier to attach to the top channel of the…

view full answer...

Answer 4

To install the hullaport to the larger crossbars you can use Xadapter part #THXADAPT11 which was designed for this this situation and you'd be set!

view full answer...

Answer 5

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 6

There are roll up tonneau covers that can work with the Truxedo Elevate Ladder Rack part #TX96NV but since I don't know which one you have specifically it's hard for me to say. Here's a list of all of the covers this is designed to fit:…

view full answer...

Answer 7

Depends on what model Pullrite Superglide you have, if its the ISR model (industry standard rail) then yes, it would be compatible with the Reese Ram Adapter part #RP30154. The adapter would install into the factory pucks of the rail kit and then you…

view full answer...

Answer 8

Finding a ladder rack that is compatible with a tonneau cover is always tough, but I have a great solution for you! I recommend going with the Thule TracRac SR #TH43003XT-510 (6-1/2ft bed) or #TH43003XT-010 (8ft bed). The Thule TracRac is a sliding…

view full answer...

Answer 9

All you need to do is take a utility knife and cut the plastic covering the stake pocket out. Then you can use the Thule TracRac SR #TH43002XT-781.

view full answer...

Answer 10

The BAK Revolver tonneau covers are confirmed to fit with the TracRac SR Ladder Racks like the part #TH43002XT-781 that you mentioned. For that you'd want the part #BAK39121 and you'd be set as this is the correct fit for your 2018 Chevy…

view full answer...

Answer 11

Yes, the Thule TracRac SR Sliding Truck Bed Ladder Rack - 1,250 lbs item #TH43002XT-781 does fit a 2021 Chevrolet Silverado short bed. TracRac provides the ultimate in versatility with this sliding ladder rack. The rack adjusts along the length of…

view full answer...

Answer 12

The Yakima HD Crossbar Set, part #Y01157, have a weight capacity of 500 lbs in conjunction (i.e. the two of them together can hold 500 lbs). The reason the single bar, part #YA34FR, states that its weight capacity is 500 lbs because these bars are…

view full answer...

Thule Kayak Carriers that Can Fit Top Channel of TracRac Sliding Ladder Racks

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching