How to Determine Correct Replacement Wet Bolts and Shackle Straps for Trailer
Question:
I have a keystone premier 30 RIPR travel trailer and I need direction on which shackles I need and wet bolts if I choose to an upgrade from the standard from the factory If I can know what brands you carry and what is adaptable to my trailer that would be great Thanks
asked by: Jim C
Expert Reply:
While we can help you determine the correct parts, we don't have a way of knowing exactly what type or length of shackle straps or bolts are on a trailer so you'll need to do a bit of measuring just to verify what you need. Trailer parts are universal so there isn't any specifically adaptable to your trailer, which is why you'll need to measure, and we carry hundreds and hundreds of brands, but most notably those like Dexter and Lippert.
It sounds like you are only looking for replacement upgrades as you didn't mention any type of upgrade kit such as the Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers # K71-359-00, so let's start with the shackle straps. To get the right ones you'll need to measure yours from center-to-center of the holes where the bolts are.
For example, if you measured that and got 2-5/8" you would need Replacement Shackle Strap # 115052. I have added a link below to our entire selection of shackle straps for you to check out.
The wet bolts are the same thing as you would only need to measure the entire length of your current bolts, including the bolt head. So for example if you measured and got 3-5/16" you will need the Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs # 126B2.
I have added a link below to our entire selection of bolts for you to check out as well.
Products Referenced in This Question
Replacement Shackle Strap - 2-5/8" Long
- Trailer Suspension Parts
- Shackle Links
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- 2-5/8 Inch Long
- etrailer
more information >
Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3" Long
- Trailer Suspension Parts
- Suspension Bolts
- Camper
- Car Hauler
- Utility Trailer
- 9/16 Inch Diameter
- 2-5/16 Inch Long
- Redline
more information >
Product Page this Question was Asked From
Dexter Heavy-Duty Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs
- Trailer Suspension Parts
- Suspension Kits
- Boat Trailer
- Snowmobile Trailer
- Double Eye Springs
- Tandem Axle
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Curt A20 5th Wheel Trailer Hitch w/ R20 Slider - Dual Jaw - 20,000 lbs
- Shop: Trailer Wiring
- Shop: Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2"
- Shop: Curt Short-Arm Weight Distribution System with Sway Control - Trunnion Bar - 10K GTW - 1K TW
- Article: Double-Eye Trailer Suspension System Review
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Most Popular Wheel Bearings
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Raise Your Travel Trailer Height
- Article: Trailer Wiring Diagrams
- Q&A: How to Determine Hanger Spacing for Tandem Axle Trailer Suspension with 26 Inch Springs
- Q&A: How to Pick Out Correct Shackle Length for Trailer Suspension
- Q&A: Upgraded Equalizer and Replacement Leaf Springs for 2020 Grand Design Transcend 27BHS
- Article: How to Replace Trailer Leaf Springs in 5 Steps
- Q&A: What Are the Torque Specs for Trailer Suspension Parts
- Q&A: Closest to 2-3/4 Inch Heavy-Duty Shackle Strap
- Q&A: How Do I Measure Axle Spread for Upgrading The Trailer Equalizers?
- Q&A: Does Changing From A 4 Leaf To A 6 Leaf Spring Add To Ride Height?