How To Wire Separate Taillight System Into Existing Wiring on 2000 Ford F250
Question:
Recently converted the truck to a flatbed. I purchased lights that have a Brake, turn signal, running lights separate and would like to keep it that way. Is there such a module that can convert my existing tail light wires in the rear of the truck to work with these lights?
asked by: Jason
Expert Reply:
We have exactly what you're needing. You'll want to use the # 118158 converter. On the INPUT side of the converter, ground the white wire to the truck frame, connect the yellow wire to the left turn circuit and the green wire to the right turn circuit. On the OUTPUT side, the yellow wire connects to the left turn lamp, the green to the right turn and the red wire would be split and connect to the brake lamps. The running lamp circuit would bypass the converter.
Products Referenced in This Question
Vehicle to Vehicle Tail Light Converter
- Accessories and Parts
- Trailer Wiring
- Mounting Hardware
- Brackets
- 7 Round
- 7 Round
- Tow Ready
more information >
Product Page this Question was Asked From
Pollak 6 Pole to 4 Pole Connector Adapter
- Trailer Wiring
- Wiring Adapters
- Single-Function Adapter
- 6 Round
- Plug Only
- 4 Flat
- Pollak
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Recommended Baseplate For A 2023 Jeep Grand Cherokee 4xe With Tow Hooks
- Article: Trailer Wiring Diagrams
- Q&A: No Splice Tow Bar Lighting Kit Recommendation for 2024 Jeep Wrangler
- Article: Performance Chips and Modules
- Article: Wiring Trailer Lights with a 6-Way Plug (It's Easier Than You Think)
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Comparing the Brake Buddy Classic 3 and Brake Buddy Select 3 Supplemental Brake Systems
- Article: Tow Bar Wiring: Which Wiring Kit is for You?
- Article: How to Measure for Travel Trailer and Fifth Wheel Steps
- Q&A: How to Make a 7-Way to 6-Way Square Jayco Trailer Connector Adapter
- Q&A: How to Measure the Angle of Trailer A Frame To Determine if a 50 Degree A Frame Coupler will Fit
- Q&A: What is Minimum Distance Require between Tandem Trailer Tires When Considering Increasing Tire Size
- Q&A: Flat-Tow Wiring for a 1988 Suzuki Samurai with Combined and Separate Signals
- Article: Determining Trailer Tongue Weight