Brake Mounting Flange That Fits 2,000 lb Axle
Question:
What is the part number for a bolt on flange for a brake assembly? The axle is 2000 lb, 3 inch diameter. What is the corresponding brake assembly for the above flange? The brake drum is 10 inches in diameter and 2.5 inches in depth. Thanks
asked by: Perry A
Helpful Expert Reply:
So we have brake mounting flanges, but they are all weld-on applications as opposed to bolt-on. Also, I did want to mention a 2,000 lb axle is typically 1-3/4 inches in diameter, and for that the correct part is the Brake Mounting Flange for 1-3/4" Round Trailer Axles - 2K # 4-34.
That is a 4-bolt mounting flange, though we do have brake mounting flanges for 3 inch round axles, which are typically 5,200 lb to 7,000 lb axles. These are 5-bolt mounting flanges and for that the correct part is the Brake Mounting Flange for 3" Round Axle # 4-44-1.
I have added links below to video reviews of both parts for you to check out as well.
Products Referenced in This Question
Brake Mounting Flange for 1-3/4" Round Trailer Axles - 2K
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Brake Mounting Flange
- 7 Inch
- 1-3/4 Inch Diameter Axle
- Redline
more information >
Product Page this Question was Asked From
Brake Mounting Flange for 3" Round Axle
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Brake Mounting Flange
- 12 Inch
- 3 Inch Diameter Axle
- Redline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Adding Electric Over Hydraulic Disc Brakes
- Q&A: Adding a 7-Way Trailer Wiring Harness to a 2008 Ford E-150 Van with Factory 4-Way
- Q&A: Availability Of 12" Replacement Brakes For Kelsey Hayes 4-Bolt Pattern With 3-1/2" Center Hole
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Brake Flange Needed to Install 12 Inch Brake Assemblies With 5 Bolt Mounting Holes
- Q&A: Recommended 12 X 2 Electric Trailer Brakes to Replace Hadco Assemblies
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: How to Determine Weight Capacity of Trailer Axle
- Q&A: Why Cant You Use Dexter Brake Assemblies On A Hayes/AL-KO Brake Flange
- Article: Trailer Wiring Diagrams
- Q&A: Recommended Disc Brake System for Salt Water Boat Trailer with Tandem Axles
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Most Popular Wheel Bearings