Are 10 Inch Electric Brake Dimensions Referring to Inside of Drum
Question:
I have an older trailer I need to replace the electric brakes first question the first dimension you give 10,12,etc is to be the drum size but is that the inside dim or the outside dim? The outside dim of the drums I have are approx. 10.5 so the inside is slightly smaller that 10- also I would like to replace the drums also but the hole pattern I have is 4 .25 do have any like this I did not come across any in your site. Thanks for your time
asked by: Rodney P
Helpful Expert Reply:
The measurement that is being referred to in regards to the size of electric brakes is the inside diameter of the drum. So for example, the Electric Trailer Brake Kit - 10" # AKEBRK-35-SA measure 10" diameter x 2-1/4" wide so that's the size of the drum they would fit.
These will work on that size drum, fit a 4-bolt mounting flange like part # 4-35 and are rated for 3,500 lbs. The Mounting Hardware # BRKH10B is also needed for the Electric Trailer Brake Kit # AKEBRK-35-SA.
In regards to replacing the hub and drum, there are none with the bolt pattern you mentioned, so you may need to replace your wheels as well. I'm not sure which hub and drum you are needing so I have added a link below to our entire selection for you, as well as a link to our selection of wheels should you also need those.
Products Referenced in This Question
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Mounting Hardware for 10" Brake Assemblies
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Hardware
- 10 Inch
- Redline
more information >
Product Page this Question was Asked From
Brake Mounting Flange for 2-3/8" Round Axle
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Brake Mounting Flange
- 10 Inch
- 2-3/8 Inch Diameter Axle
- Redline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: 7 inch brake drums
- Shop: Trailer Hub and Drum Assembly - 2K Axles - 7" Diameter - 5 on 4-1/2 - L44649 - Pre-Greased
- Q&A: What are the Dimensions of 10-Inch Brakes for 3,500 lb Axles?
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Trailer Wiring Diagrams
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Q&A: Demco vs. etrailer Hydraulic Dacromet 3,500 lb Trailer Brakes
- Q&A: Recommendation for Installation of a Brake Mounting Flange on a Trailer Spindle and Axle
- Q&A: Recommended Disc Brake System for Salt Water Boat Trailer with Tandem Axles
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: 86-1/2 Inch Long Axle Option For Grand Design Trailer
- Article: Adding Electric Over Hydraulic Disc Brakes
- Q&A: Do I Need Brakes On Both Axles of a Car Hauler Trailer?
- Q&A: Recommended Wet Bolt and 2-1/4" Shackle Strap Kit for Tandem Axle Trailer
- Article: How to Replace Trailer Leaf Springs in 5 Steps
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs