Does Folding etrailer Cargo Carrier Fit 2020 Toyota Tundra with Factory Hitch?  

Question:

Expert Reply:

You may need a separate part to make this cargo carrier compatible with your 2020 Toyota Tundra factory hitch.

I test fitted the etrailer 24x62 Folding Cargo Carrier # e98872 the other day on a 2020 Toyota Tundra with a factory hitch and found that I couldn't install it due to how the new Tundra has a reinforced hitch that is a bit thicker than your average hitch. The newer Toyota factory hitches are notorious for having tricky hitch configurations, like their wiring brackets are in the way of the hitch pin locks or their receivers are too thick.

In our case with the etrailer 24x62 Folding Cargo Carrier # e98872, the anti-rattle bolt did not fit through the hitch pin hole. It was too short and the carrier could not be installed safely. A possible solution for this is to use a longer compatible anti-rattle bolt like # HE6001. The etrailer cargo carriers use the Anti-Rattle Bolt # e98910. It has an overall length of 3-9/16" and a 1/2" pin diameter. I recommend measuring your own hitch width to find out how long of a bolt you will need and remember that some extra space is needed on the end for the clip or the hitch pin lock.

expert reply by: Evangeline M

0