Hitch Pin Options For Hollywood Racks Destination 4 Bike Rack

Question

Question:

Hello, Hollywood Racks Destination Bike Rack four bikes I really like this bike rack. Just wondering if I would have an option to use a flush hitch pin instead of screw-in pin that came with it. Any recommendation? Thanks!

asked by: Chan P

1

Helpful Expert Reply:

Due to the threaded hitch pin design of the Hollywood Racks Destination 4 Bike Rack # HR4000 you will not be able to use a non threaded hitch pin. This is due to the threaded hitch pin tightening the Hollywood Racks Destination Bike Rack to your vehicle's trailer hitch receiver to limit movement while driving. Use of a standard style hitch pin would lead to a more unstable ride.

I recommend leaving a ratchet wrench with either a 19mm or 3/4inch socket in your vehicle to speed up removal of the hitch pin when taking off the rack.

I attached a video of the Hollywood Racks Destination 4 Bike Rack # HR4000 for you to take a look at.

expert reply by: Samuel C

1

Answer 1

There are no reflectors that come with, or are made specifically for the Thule Hitching Post Pro #TH934XTR, but that doesn't mean you cannot add some yourself. The Oralite Reflector #RT21RB that you referenced is definitely an option. You…

view full answer...

Answer 2

Yes, it is! The etrailer Hitch item #e98903 has been confirmed to fit all models of the 2022 Chrysler Pacifica including the plug in hybrid. This hitch is custom fit and bolts to your Chrysler with included hardware. This is a class III hitch with…

view full answer...

Answer 3

The Curt platform bike rack #C18087 only can carry bikes up to 45 lb but it can fit tire widths up to 3 inches so if there's a way to take 5 lbs of the bike like by removing the battery it would work well for you.

view full answer...

Answer 4

The Hollywood Racks Destination Bike Rack #HLY94FR can support up to 35 lb bikes so since you're needing to carry E-Bikes you need the Hollywood Racks Destination E Bike Rack #HLY66ZR instead, which is rated for up to 70 lb bikes. I know…

view full answer...

Answer 5

To determine the size of the receiver lock you will need you need to determine the size (see link below) of the receiver on your vehicle and you also need to measure the overall width of the outside of the receiver at the hitch pin hole. If you have…

view full answer...

Answer 6

The Lippert Push Bar for RV Screen Door #LC83UD is designed to fit 26" to 30" door. This information is found on the door tag as the door itself will be narrower than this hence the reason the bar has a length of 21-1/2" to 28".…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

It sounds like you are needing the SnapPad EQ Compact Jack Pads for Equalizer Leveling Systems #SP24FR4. These fit the 7" EQ leveling system legs which are considered to be square with the corners cut off. They consider them squares since the…

view full answer...

Answer 9

You will find that opening a tail gate all the way is just not possible with a hitch mounted bike carrier on a pickup truck. Since the tail gate extends so fat beyond the bumper when opened it would require a bike carrier to almost lay flat. Using…

view full answer...

Answer 10

The Yakima BackSwing Swing Away Hitch Extender for Bike Racks - 2" Hitches, part #Y02483, will work with the Hollywood Racks Destination Bike Rack for 4 Bikes - 2" Hitches, part #HR4000. Please keep in mind that adding any hitch…

view full answer...

Hitch Pin Options For Hollywood Racks Destination 4 Bike Rack

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching