What 7-Way Vehicle Harness For Trailer With Trailer Brakes On 2020 Jeep Cherokee
Question:
I need to have lights and electric trailer braking. Will this harness accommodate electric brakes as well?
asked by: Bruce S
Expert Reply:
The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56406 for your 2020 Jeep Cherokee will supply power for trailer lights but is not able to supply power for electric trailer brakes by itself. You need to add a 7-way connector that will work with electric trailer brakes.
I recommend adding the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56406 for a plug and play installation on your vehicle, and then adding the etrailer Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat # ETBC7 that gives your vehicle both a 7-way connector and a 4-way connector.
I attached a video review for the Curt T-Connector Vehicle Wiring Harness # C56406 and the etrailer Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat # ETBC7 for you.
If you do not have a trailer brake controller yet I recommend the Tekonsha Prodigy P3 # 90195 which will work with trailers that have up to 4 axles, and allows for 360 degree vertical plane installation that allows for additional mounting options in your Jeep. I attached the video review for the Tekonsha Prodigy P3 # 90195 for you to take a look at.
Products Referenced in This Question
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- Tekonsha
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Choose the Right Trailer Hitch Class
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Can I Use the Curt 58963 Tow Harness and the Curt C56406 4-Way Connector on a 2020 Jeep Cherokee?
- Q&A: Is There Way to Increase Towing Capacity of 2019 Jeep Grand Cherokee
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Q&A: Does the Galeo Ride GPS Tracking Device for Bikes Come with Everything Needed
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Trailer Hitch Receiver For 2021 Jeep Cherokee Trailhawk That Protrudes Through Bumper
- Article: Anti-Rattle Devices
- Article: Trailer Wiring Diagrams
- Q&A: Recommended Trailer Hitch for 2019 Jeep Cherokee
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector