What Are the Dimensions of the TruRyde #84 Spindle for 3,500-lb Trailer Axles
Question:
Could you provide the dimensions of spindle TRU24FR?
asked by: Mark
Expert Reply:
The #84 Spindle # TRU24FR is 8-1/4" long with a 2" diameter stub. This spindle will fit the following bearings and components, which are all sold separately:
Bearings-
Inner bearing: # L68149 (1.378" inner diameter)
Outer bearing: # L44649 (1.063" inner diameter)
Races-
Inner race: # L68111
Outer race: # L44610
Grease seal: # 58846
Inner diameter: 1.719"
Outer diameter: 2.565"
Products Referenced in This Question
Grease Seal - Double Lip - ID 1.719" / OD 2.565" - for 3,500-lb Axles
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.719 Inch I.D.
- 2.565 Inch O.D.
- etrailer
more information >
Replacement Race for L44643 and L44649 Bearings
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 1.980 Inch O.D.
- Bearing L44643
- Bearing L44649
- Race L44610
- 2000 lbs Axle
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Race for L68149 Bearing
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 2.361 Inch O.D.
- Bearing L68149
- Race 68111
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
#84 Spindle for 3,500-lb Trailer Axles - 2" Diameter
- Trailer Spindles
- Standard Spindle
- 2 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
Continue Researching
- Q&A: How to Determine if Trailer has 84 Spindle to Pick Out Replacement
- Article: Most Popular Wheel Bearings
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: How to Measure a Trailer Axle
- Q&A: Where to Measure on Trailer Spindles to Determine Replacement Hubs
- Q&A: Removing and Replacing Trailer Spindles
- Q&A: Valve Stem Recommendation to Use with Dexstar Steel Spoke Trailer Wheel AM20232
- Q&A: Length of Wheel Studs on Dexter Trailer Hub # K08-201-9B
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Tips for How to Identify a Trailer Axle
- Q&A: Correct Replacement for AL-KO 7230 Hub/Drum and Brakes
- Article: Where to Position the Trailer Axle?