Replacing a Dexter Axle with a Serial Number
Question:
I have a Dexter p-15 model SLR SN 2946609 That is all the info I can find on my axle. Is this enough info to determine a replacement axle?
asked by: Jay C
Expert Reply:
Normally, with a serial number on your Dexter Axle, we are able to determine a proper replacement for your axle. However, after having spoken with Dexter, the only information they were able to provide was that it was made in 1998 and has a capacity between 2K and 8K.
This serial number is very old, so they weren't able to provide enough information to pinpoint an exact replacement.
In order for you to get the right replacement, there are a couple of measurements that can help us determine which you need.
First is the length. Measure from the hub face to the other hub face to determine the proper length. Also measure the spring seat length. I've attached a picture that illustrate these lengths.
Next is the diameter of the axle rod. With that measurement, we can find the axel's capacity. They usually fall within these parameters:
- 1,000-lb - 2,000-lb Axles: 1-1/2 inch - 1-3/4 inch diameter
- 3,500-lb Axles: 2-3/8 inch diameter
- 6,000-lb - 7,200-lb Axles: 3 inch diameter
- 8,000-lb Axles: 3-1/2 inch diameter
- 9,000-lb Axles: 4 inch diameter
- 10,000-lb Or more axles: 5 inch diameter
With the two lengths and capacity, we will be able to get you the correct replacement.
Product Page this Question was Asked From
Dexter Trailer Axle w/ Electric Brakes - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Spindles
- Electric Brakes
- 3500 lbs
- 5 on 4-1/2 Inch
- 74 Inch Long
- 89 Inch Long
- No Drop or Lift
- Dexter
more information >
Continue Researching
- Shop: Loadstar ST225/75D15 Bias Trailer Tire - Load Range D
- Shop: Provider ST225/75R15 Radial Trailer Tire - Load Range E
- Search Results: torsion axle
- Q&A: Recommended Replacement Axles for Old Dexter Axle #11 5,200 lb Torsion Axles
- Shop: Replacement Wire Clip for Magnet Lead Wire on Brake Assemblies
- Shop: Replacement Shoe and Lining for Nev-R-Adjust 12" x 2" Electric - RH
- Shop: Shoe Hold Down Spring for BP04-185
- Shop: Replacement Brake Adjustment Screw Kit for 10" and 12" Electric Trailer Brake Assemblies
- Shop: Electric Brake Shoe Return Spring - 12" x 2"
- Video: Performance Tool Plastic Bearing Packer Review
- Video: Review of Powerbuilt Lubricants Sealants Adhesives - Greasing Tools - ALL647646
- Search Results: dexter grease
- Search Results: grease packer
- Q&A: Bearing Kit for Dexter D35 Trailer Axle
- Video: Ultra-Fab Products Camper Jack - Leveling Jack - UF48-979032 Review
- Video: Stromberg Carlson Leveling Scissor Jack Review
- Video: Bearing Buddy Trailer Bearings Races Seals Caps - Caps - BB2441T-SS Review
- Search Results: jack extension
- Search Results: bottle jack extension
- Video: Performance Tools Bearings, Races, and Seals Installation Set Review
- Search Results: dexter
- Search Results: brass
- Q&A: Hub and Drum Recommendation for Dexter 3,500 lb Trailer Axle with Brake Assemblies
- Q&A: Replacement 3,500 lb Trailer Axle With 95 Inch Hub Face to Hub Face Measurement
- Video: Review of TruRyde Trailer Spindles - #42 EZ Lube Spindle - TRU39FR
- Q&A: How to Pick Out 3,500 lb Trailer Axle from Dexter 51955
- Q&A: How To Remove Trailer Spindle
- Article: What Exactly is Tongue Weight?
- Q&A: What Is Hole Size For Mounting 2 Inch Round Trailer Lights With Rubber Grommet