Travel Trailer Hitch that can Clear a 4-Inch Bumper

Question:

I have a Winnebago Minnie 2351DKS 2016/2017 travel trailer. I am looking for a 2 in hitch that will allow the 4 inch tube bumper that contains my sewer hose to remain and have the hitch reciever under the bumper. I currently have bolted to the bumper a 2 inch reciever and a bolt on spare tire. I am concerned that even with adding Mount-n-Lock SafetyStruts Heavy Duty RV Bumper Brackets it wont carry the weight of a 70 lb curt cargo carrier,40 lb cargo box, a predator 3500 generator and any other items I would like to store. Would this hitch work and mount easily? If not what can you recommend? Thank you for your assistance.

asked by: Randall L

Expert Reply:

You are right to be concerned about overloading your bumper. While your bumper might be able to handle that amount of weight, I don't recommend testing it.

The Multi-Fit Hitch, part # 5350, that you mentioned is an excellent alternative. It measures 7 inches from the center of the tube to the front of the receiver, so it should clear your 4-inch bumper with no problem. It has a gross tongue weight of 500 pounds, so the accessories that you mentioned won't be a problem either. Of course, you need to check your Minnie's manual to ensure that it can handle that weight as well. I've linked to a video review of this hitch for your consideration.

Keep in mind that this extends from 24 inches to 46 inches. If you need something longer, then I recommend the Curt Adjustable Hitch, part # C13704, as it can extend out to 66 inches. This one measures 11 inches for the tube. I've linked to a video review of this hitch just in case.

expert reply by: Kef G