Brakes Jerk and Grab when Braking Using Curt Echo Brake Controller # C51180
Question:
I have a 2007 Jeep Commander. I pull a Sunlite 16bh trailer. Less than 3000 lbs. The controller worked smoothly the first few times I took it out, but now the brakes jerk and grab when applied. The response it set at 10, and the sensitivity set at 2. I tried changing to 15/1, 10/1 with no improvement. The hitch and wiring on the Jeep is new, and the trailer is a 2020 that we bought new. Thank you for your input.
asked by: Catherine D
Expert Reply:
In order to troubleshoot your braking issues with the Curt Echo # C51180, first start by adjusting the output settings on your controller. Curt recommends testing the controller output by driving forward on a dry and level paved or concrete surface. At approximately 25 mph, apply the vehicle's brakes. If the trailer brakes lock up, decrease the max output. Repeat this process until stops are firm, just short of lock up. Then repeat the same process for setting the sensitivity until you are able to come to a smooth stop.
If changing the output and sensitivity on the brake controller, you may need to adjust the setting on your trailer brakes. Check out the video linked below for details on how to properly set your brakes.
Product Page this Question was Asked From
Curt Echo Wireless Brake Controller - 7-Way Plug Mount w/ Bluetooth App - 1 to 2 Axle - Proportional
- Trailer Brake Controller
- Proportional Controller
- Hidden
- Up to 2 Axles
- Smartphone Display
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Reese Pro Round Bar Weight Distribution w Sway Control - Round Bar - 6,000 lbs GTW, 600 lbs TW
- Shop: Brake Controller
- Shop: Curt Echo Wireless Brake Controller - 7-Way Plug Mount w/ Bluetooth App - 1 to 2 Axle - Proportional
- Q&A: Troubleshooting Jerking/Grabbing Brakes when Using Curt Echo # C51180
- Shop: Fastway e2 Weight Distribution w/ 2-Point Sway Control - Round - 10,000 lbs GTW - Without Shank
- Q&A: Recommended Weight Distribution System for a 3,800 lbs Camper
- Shop: Reese Steadi-Flex Weight Distribution System w/ Sway Control - Trunnion - 10K GTW, 1K TW
- Q&A: Troubleshooting A Curt Venturer Brake Controller That Is No Longer Working
- Article: 5 Things to Know About Weight Distribution Hitches
- Video: Review of Reese Weight Distribution Hitch - 6K WD With Sway Control - RE34FR
- Video: Equal-i-zer Weight Distribution EQ90-02-1099 Review
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Q&A: Fix For Curt Echo Wireless Brake Controller Locking Up Trailer Brakes At Low Speeds
- Q&A: Recommended Weight Distribution System for Jayco Jay Flight 145RD
- Shop: Curt Venturer NEXT Trailer Brake Controller - 1-3 Axles - Time Delayed
- Video: Hopkins 7 Pole to 4 Pole with LED Nite-Glow Adapter Review
- Shop: Equal-i-zer Weight Distribution w/ 4-Point Sway Control - No Shank - 4,000 lbs GTW, 400 lbs TW
- Shop: Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 6,000 lbs GTW, 600 lbs TW
- Shop: RV Jack Pads
- Shop: RV Roof Membrane
- Shop: RV Antenna and Radio
- Shop: Wheel Cover
- Shop: Roof Rack
- Q&A: How to Properly Set Gain/Sensitivity of The Curt Echo Wireless Brake Controller # C51180
- Q&A: Troubleshooting Brakes Locking Up with a Curt Echo Brake Controller
- Search Results: furrion backup camera
- Video: Thule WingBar Evo Crossbars Installation - 2021 Jeep Grand Cherokee
- Article: Determining Trailer Tongue Weight
- Video: This Old Trailer: Electric Trailer Brake Installation Part 1
on Trailer Brake Controller
