Bearings and Seals for L44649 and Spindle Seal Diameter of 1.24 Inches
Question:
Have boat trailer both inner outer bearings are L44649 both inner outer hub diameter is 1.975 with caliper, the shaft where inner seal would ride is 1.247,has 4.80*12,5 hole wheels,1/2 studs, suggestion for bearings a kit or bearing buddy complete kit.
asked by: Clarence B
Helpful Expert Reply:
We have all the parts you need, though you'll have to order them individually as there isn't a full kit:
- Replacement Trailer Hub Bearing # L44649
- Replacement Race # L44610
- Double Lip Grease Seal # 34823
- Bearing Buddy Bearing Protectors # BB1980A
For grease I recommend the Prime Guard Wheel Bearing Hi-Temp Red Grease # L11380, and for a bearing packer I recommend the Bearing Packer # L70025 or # ALL647646.
Products Referenced in This Question
Double Lip Grease Seal - ID 1.249" / OD 1.983" - Qty 1
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.249 Inch I.D.
- 1.983 Inch O.D.
- TruRyde
more information >
Powerbuilt Deluxe Bearing Packer
- Lubricants Sealants Adhesives
- Greasing Tools
- Bearing Packer
- Powerbuilt
more information >
LubriMatic Prime Guard High Temperature Wheel Bearing Grease - Red - 16-oz Can
- Lubricants Sealants Adhesives
- Grease
- Brake and Bearing Grease
- Lithium Complex-Based
- Standard Bearing Grease
- Polyurea - Conventional
- 16 oz
- LubriMatic
more information >
Replacement Race for L44643 and L44649 Bearings
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 1.980 Inch O.D.
- Bearing L44643
- Bearing L44649
- Race L44610
- 2000 lbs Axle
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
LubriMatic Deluxe Bearing Packer
- Lubricants Sealants Adhesives
- Greasing Tools
- Bearing Packer
- LubriMatic
more information >
Product Page this Question was Asked From
Bearing Buddy Bearing Protectors - Model 1980A w/ Auto Check - Chrome Plated (Pair)
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.98 Inch
- Bearing Buddy
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Hub, Bearings, and Grease Seal for 3,500 lb Dexter Axle
- Article: How to Measure a Trailer Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Tire Sizing
- Q&A: Can You Install an EZ Lube Hub and Drum on a Non EZ Lube Axle
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Q&A: Does The B&W Companion Require Additional Foot Pads Once Installed
- Article: Slipper Spring Trailer Suspension System Review
- Q&A: Difference Between Bearing Buddy 1980 Models
- Article: Double-Eye Trailer Suspension System Review
- Q&A: How Does Inner Bearing Get Grease When using Bearing Buddy
- Q&A: USA Made Bearing Kit For An AL-KO 4,400 lb Axle
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision