Troubleshooting Trailer That Wont Directly Connect to Curt 4-Way Harness on 2016 Ford Edge
Question:
I have a 2016 Ford Escape and recently bought this wiring harness from you. I have installed. I also have a Detail 2K trailer. The problem i have is the 4 way connectors won’t match. I can’t get them to connect. Is there an adapter I need or should i change out the connector on the trailer. Thanks
asked by: Don G
Expert Reply:
The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56335 is the correct fit for your 2016 Ford Escape and comes with the standard 4-way vehicle side connector. If your trailer doesn't have the standard 4-way trailer connector for the trailer side like # HM38134 for example, then you will want to replace it. You can splice in a connector like this or replace the entire wiring harness with # A20WB for example. I've attached an article on trailer wiring to assist.
If I misunderstood your question and your trailer has a 7-way trailer connector, then you will want to add the # ETBC7L to your vehicle side as the 4 way to 7 way adapter along with brake controller # C51180 to avoid any wiring under your dash and give you trailer brakes.
Products Referenced in This Question
20 Ft 4-Way Trailer Wiring Harness - Wishbone Style - 30" Ground
- Trailer Wiring
- Trailer Connectors
- Trailer End Connector
- 11 - 20 Feet Long
- Plug and Lead
- 4 Flat
- Optronics
more information >
Curt Echo Wireless Brake Controller - 7-Way Plug Mount w/ Bluetooth App - 1 to 2 Axle - Proportional
- Trailer Brake Controller
- Proportional Controller
- Hidden
- Up to 2 Axles
- Smartphone Display
- CURT
more information >
7-Way RV Upgrade Kit for Trailer Brake Controller Installation - 12 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Replacement Hitch Install Hardware for Draw Tite # 75782
- Article: How to Choose the Right Trailer Hitch Class
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: My Trailer Hitch Doesn't Fit
- Q&A: Recommended Route for Power Wire on a 2015 Ford Escape with Fuse Panel at the Rear
- Q&A: Trailer Hitch Fit For 2016 Ford Escape
- Q&A: Troubleshooting Low Voltage Trailer Wiring for 2013 Ford Escape
- Q&A: Why Does Curt 4-Way Kit part # C56335 Store In Interior of Vehicle
- Q&A: Can a 4-Pole Trailer Connector Be Used to Activate Trailer Brakes
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Top Weight Distribution Hitches for a Buttery Smooth Ride
- Article: Brake Controller Installation: Starting from Scratch
- Article: Trailer Wiring Diagrams