Is Dexter Axle Trailer Hub & Drum Assembly # 8-173-16UC3 Recommended for 1993 Starcraft
Question:
My 1993 Starcraft has a Dexter Axle with 7inch X 1-1/4inch brake shoes and 7inch brake drums. It appeares your Part numbers 23-48 and 23-47 are the brake assembly replacments. My existing drums have wheel bolts. Is your P/N 8-173-16UC3 a replacment for my drums and are they to be used with the above mentioned brake assemblies?
asked by: Joe B
Expert Reply:
The Dexter Axle Trailer Hub & Drum Assembly # 8-173-16UC3 is a compatible fit for the Dexter axle on your 1993 Starcraft so long as the weight falls at or below the product weight capacity of 2000 lbs and is compatible with your existing bearings. This assembly works only with 1-1/4 inch brake shoes, not 1-3/4 inch shoes and has a 4 on 4 inch bolt pattern. I have included a link to a video review of this item.
The other two items you referenced, the Dexter Axle 7 Inch Brake Assembly (RH) # 23-48 and 7 Inch Brake Brake Assembly (LH) # 23-47 are the intended assemblies for item # 8-173-16UC3 which include the bearings, races, and seal. They also have a weight capacity of 2000 lbs (as a pair) and mounts on a 4-bolt hub.
You will need to pull your existing hubs to obtain the reference numbers from them as to ensure your existing hubs have the same bearings. I recommend the TruRyde Replacement Trailer Hub Bearing # L44649 along with the TruRyde Grease Seal # 10-9. I have included a link to a video review of this seal as well as a video providing instructional tips on the removal, inspection, and re-installation of trailer bearings.
If you are unable to read or find the bearing numbers, you will need to use a dial or digital caliper to get dimensions from the spindle. I have provided a photo that should help you determine where the measurements need to be made.
Products Referenced in This Question
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.500 Inch I.D.
- 1.987 Inch O.D
- TruRyde
more information >
Dexter Electric Trailer Brake Assembly - 7" - Left Hand - - 2,000-lbs to 2,200-lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 2000 lbs
- 2200 lbs
- Brake Assembly
- Manual Adjust
- 7 x 1-1/4 Inch Drum
- Dexter
more information >
Dexter Electric Trailer Brake Assembly - 7" - Right Hand - 2,000-lbs to 2,200-lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 2000 lbs
- 2200 lbs
- Brake Assembly
- Manual Adjust
- 7 x 1-1/4 Inch Drum
- Dexter
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 2,200-lb Axles - 7" Diameter - 4 on 4
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L44649
- L44649
- For 2200 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Round A-Frame Trailer Jack - Topwind - 14-1/4" Travel - 2,000 lbs
- Shop: Dexter Trailer Hub and Drum Assembly for 2,200-lb Axles - 7" Diameter - 4 on 4
- Shop: Single Axle Trailer Fender w/ Backing Plate - Steel - 13" to 14" Wheels - Qty 1
- Q&A: Parts Needed to Change Hydraulic Trailer Brakes Over to Electric Brakes on a 1997 Jayco Tent Trailer
- Q&A: Recommendation for 10 inch Wheels and Load Range E Tires on 1997 Jayco Eagle Pop Up Trailer
- Shop: Trailer Wiring
- Shop: etrailer Electric Trailer Brakes - 7" - Left/Right Hand Assemblies - 2,000 lbs
- Shop: Mighty Cord 7-Way RV-Style Trailer Connector w/ Molded Cable - Trailer End - 6' Long
- Shop: Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Shop: Dexter Electric Trailer Brake Assembly - 7" - Left Hand - - 2,000-lbs to 2,200-lbs
- Q&A: Do Trailer Jacks with Two Wheels Make it Easier to Maneuver a Jack on Concrete
- Q&A: Which is Better, a Side Wind Trailer Jack or a Top Wind Trailer Jack
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: How to Determine if a Torsion Axle Needs to be Replaced and Lifting a Trailer Off the Ground
- Search Results: torsion axle
- Search Results: tire fender
- Q&A: Adding Electric Brakes to 1999 Jayco Pop-Up Camper Trailer
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Video: etrailer Electric Trailer Brake Kit Installation AKEBRK-2
- Shop: Brake Controller
- Search Results: hinge
- Search Results: trailer chains
- Search Results: battery
- Search Results: fender