Disc Brake Upgrade for 2002 Loadmaster Tandem Axle Trailer
Question:
Can I use these on my torsion axle, it has shoes now, I want disc
asked by: Robert B
Helpful Expert Reply:
If you have 3,500 lbs capacity axles, you can use the Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs # K2HR35D. These hubs and brake calipers will fit on your torsion axles. You will need to upgrade your surge brake actuating coupler or electric over hydraulic actuator to make it compatible with disc brakes. The drum brakes have a master cylinder rated for 1,000 to 1,200 psi, but the disc brakes require 1,600 psi so an upgrade is needed. The same brake lines can be used. I've linked an article to assist with the upgrade.
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 10" Hub/Rotor - 5 on 4-1/2 - Dacromet - 3,500 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 3500 lbs
- Brake Assembly
- 5 on 4-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Most Popular Wheel Bearings
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Q&A: Replacement Brake Setup for Trailer with DB-42 Disc Brakes
- Q&A: Required Bolt Length for Installing A-Frame Trailer Jack
- Q&A: Replacing Older Tie Down Engineering 46210 and 46845 Trailer Hubs
- Q&A: Difference Between Dexter DX7.5L A-60 Brake Actuators For Disc Brakes
- Article: Where to Position the Trailer Axle?
- Q&A: Recommended Coupler for Boat Trailer With 3" Wide Channel
- Q&A: Dimensions and Mounting Hole Spacing of Demco Channel Tongue Trailer Coupler # 12564
- Article: Trailer Wiring Diagrams
- Q&A: Replacement Disc Brakes for 2013 EZ Loader Adjustable Boat Trailer
- Article: Adapters for Towing a 5th Wheel Trailer with a Gooseneck Hitch